+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Kess V5.17 FW V2.32 Lights flashing Red-Green - Red PCB BOARD (/showthread.php?tid=46722)
Kess V5.17 FW V2.32 Lights flashing Red-Green - Red PCB BOARD - Veex.... - 16-02-2019
Hi Guys,
Its been a while, i have kess V2.32 FW5.17 EU RED PCB BOARD , After flashing Seat ibiza i have notice device is continusouly flashing red and green simultaneously.
As soon you plug the device usb cable to computer it is flashing Red and green. Is there any fix for this?
RE: Kess V5.17 FW V2.32 Lights flashing Red-Green - Red PCB BOARD - vectrac20tsri - 23-10-2019
Did you ever fix this? I got the same issue
RE: Kess V5.17 FW V2.32 Lights flashing Red-Green - Red PCB BOARD - RadovanPetkovic - 01-07-2022
(23-10-2019, 19:23 PM)vectrac20tsri Wrote: Did you ever fix this? I got the same issue
When the green and red LEDs light up together. This means that one of the inputs is not correct. The culprit for this is the protective integrated circuit with SMD mark UL46. It has the role of protecting the device from excessive voltage peaks. It's basically a Zener diode that gets damaged and creates a short or break. The easiest way to find the fault is to desolder the IC circuit one by one. And when it starts, the red LED only lights up. That integrated circuit is the problem. Only KESS can be removed, it will be functional but without protection. This is often the case when the device is used on cars that have a poor installation or is operated while the engine is running.