Solved ✔ mazda axela 2007 specific transponder - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Solved ✔ mazda axela 2007 specific transponder (/showthread.php?tid=47166) Pages:
1
2
|
mazda axela 2007 specific transponder - Black Alien - 25-02-2019 hello friends do we have a specific transponder for mazda 3/axela? my client lost his key. I have Tango programmer to make a key by dump. RE: mazda axela 2007 specific transponder - raffy haddad - 25-02-2019 tango will tell you what transponder type to use usuallu original trans. is 4d.63 regards did you find the eeprom on dash ?you idn't report back mate regards p.s don't open 2 threads concerning 1 subject read rules mate also use magic buttons please ( thanks and reputation ) at least RE: mazda axela 2007 specific transponder - Black Alien - 25-02-2019 yes I have found the eeprom on the dash 93c56 and I used 4D60 to make a key..the car did not start. Now i will use 4D63 Tango only said 4D type only that is why i got confused RE: mazda axela 2007 specific transponder - raffy haddad - 25-02-2019 hello tango should make transponder id 63 after generate strange can you post eeprom dump to check ? regards p.s some mazda cars need to synchronise dash ecu did tango generate new file ? can you also post data of the transponder generated by tango ? regards RE: mazda axela 2007 specific transponder - Black Alien - 26-02-2019 here is the file created by tango after making a new key I have uploaded it in the eeprom but I have not test the vehicle yet. The owner is out a bit RE: mazda axela 2007 specific transponder - raffy haddad - 27-02-2019 something wrong with file in original file how many keys are used ? in this dump that you post is it read as 8 or 16 bit ? post original dump and the transponder data original and the transponder made by tango your file seems not good regards RE: mazda axela 2007 specific transponder - Black Alien - 28-02-2019 this is the main file.. original file... i once erased the lost registered key because it failed to add a new key so here is the dump read from eeprom the very first day and now I have made a key using 4D 63 after the first file did not start the engine here is the key data below i havent tried this new file yet. if there is something wrong with the file then I may beg you friends to share a working one that I can use to make a new key RE: mazda axela 2007 specific transponder - raffy haddad - 28-02-2019 hello no need to beg Thats why this familly is intented to help each other please read the original key and the key made by tango by key reader and post here might your new transponder wrong Your main file compared to other not contain any key data so it must be manipulated or wrong read If the dash is with you read eeprom as 8 and 16 bit regards P.s please post all i asked you so i can help you in a good way RE: mazda axela 2007 specific transponder - Black Alien - 28-02-2019 well.. is there is any eeprom original data for mazda 3? I can write it back in the eeprom and read it again to make a new key with TAngo and post new key data generated by my Tango is this file correct? Can I use it to make a key? RE: mazda axela 2007 specific transponder - Black Alien - 28-02-2019 my main file got no key..I erased the keys when I tried to program the key on board using x 1oo. the when I noticed a failure to add a key, i suggested to remove eeprom and make key by dump using Tango |