Ford c-max - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Ford c-max (/showthread.php?tid=47232) |
Ford c-max - Kinder - 26-02-2019 c-max 2013 usa hybrid start stop, seems like key should be 4d6f + remote with nxp on pcb, bcm 95320, tango recognize, writes transponder, car starts, but remote/keyless learn not successfull, what procedure or corect remote should be? RE: Ford c-max - flamuri - 26-02-2019 2010-
If the key has been successfully programmed it will start your vehicle and operate the remote entry system (if the new key is an integrated keyhead transmitter). If programming was not successful, wait 10 seconds and repeat Steps 1 through 8. If you are still unsuccessful, take your vehicle to your authorized dealer. [/size] RE: Ford c-max - Kinder - 27-02-2019 you sure this procedure for keyless system? and strange need have 2 coded and 1 unprogrammed, so 3 keys? RE: Ford c-max - Kinder - 09-04-2019 CJ5T-15K601-DX used original keys can be relearing to another car? after learning are locked? procedure is just to push unlock button for 1 sec |