MRS module - E39 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13) +--- Thread: MRS module - E39 (/showthread.php?tid=47483) |
MRS module - E39 - mapkrk - 03-03-2019 hello, need some info. I wanted to disable seat occupancy mat on 5 series e39 and after coding I can't erase errors. I get error message " -ECU rejected " when trying to delete errors in both INPA and ISTA. Did I kill the airbag module ? Thanks in advance. RE: MRS module - E39 - muskatas - 05-03-2019 i believe yes. no other errors? for example internal error? RE: MRS module - E39 - mapkrk - 05-03-2019 There’s communication with airbag module, can read errors but can’t erase them. (05-03-2019, 21:25 PM)muskatas Wrote: i believe yes. no other errors? for example internal error? RE: MRS module - E39 - Enabled - 11-03-2019 Again, do you have ECU internal error F0 or 240 as part of your errors?? RE: MRS module - E39 - mapkrk - 13-03-2019 (11-03-2019, 19:21 PM)Enabled Wrote: Again, do you have ECU internal error F0 or 240 as part of your errors?? No I don't think so but I'll check it once again this weekend just to make sure. RE: MRS module - E39 - dimitar - 20-03-2019 reprograming mcu is the only way to repair the module after coding wrong values RE: MRS module - E39 - mapkrk - 09-05-2019 I got a use airbag module from the scrap yard but not from the wreckage. I have installed it in my car tried to code it in ista p. It was only a partial success. Please see picture attached. Anyway it still gives me a message “Access to ECU is rejected”. Any idea ? RE: MRS module - E39 - tihiuvek - 17-05-2019 If you have error 240 than you can not recode. RE: MRS module - E39 - mapkrk - 22-05-2019 There are so many errors but yes I have noticed an internal error 240. Is there any other way to fix this module ? RE: MRS module - E39 - muskatas - 03-07-2019 (22-05-2019, 10:24 AM)mapkrk Wrote: There are so many errors but yes I have noticed an internal error 240. Yes, read dump and post here for fix. |