+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: logo dacia or LG hang on display (/showthread.php?tid=47616)
logo dacia or LG hang on display - ahmetusta61 - 06-03-2019
hi
a lot of problems occurs in these radios fitted in clio dacai duster and sandero cars
I have more 10 units waiting for repair and till now no solution yet
radios reboot by themselfs logo dacia or LG hang on display ...
proceesor inside NPX
is it possile to use JTAG to restore original firmware?
I will pay for solution
best regards
RE: logo dacia or LG hang on display - alfabit - 06-03-2019
Yes, jtag reads it, or get uProc in bootmode and read/reflash it. in your case 99% chances are the NAND memory failure, must be replaced with external SDcard
More explained on very good french/algerian forums you get from there.
RE: logo dacia or LG hang on display - vainn - 16-03-2019
(06-03-2019, 10:38 AM)ahmetusta61 Wrote: hiThere is nothing to pay for, this forum is for helping each other
a lot of problems occurs in these radios fitted in clio dacai duster and sandero cars
I have more 10 units waiting for repair and till now no solution yet
radios reboot by themselfs logo dacia or LG hang on display ...
proceesor inside NPX
is it possile to use JTAG to restore original firmware?
I will pay for solution
best regards
For which version of medianav you need help?
You can boot from USB via NK.bin with small interference on pcb and you can check over Wince for storagecard1,2,3,4