+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Porsche 986 boxter start issue (/showthread.php?tid=47954)
Porsche 986 boxter start issue - salaausi - 13-03-2019
Looking for a help to fix my porsche 986 2004 starting issue.
I have swapped the engine with 996.
Only the ECU is replaced from 996. After all car only start once. When the second time try to start engine won't crank. But when disconnect the ecu plugs and reconnect again car starts again only once but not the second time.
Any fix for this?
Cheers.
RE: Porsche 986 boxter start issue - ROD-BENDERS - 13-03-2019
(13-03-2019, 22:41 PM)salaausi Wrote: Looking for a help to fix my porsche 986 2004 starting issue.
I have swapped the engine with 996.
Only the ECU is replaced from 996. After all car only start once. When the second time try to start engine won't crank. But when disconnect the ecu plugs and reconnect again car starts again only once but not the second time.
Any fix for this?
Cheers.
Sounds like immo issue... i will look tomorrow see if immo off solution exists.... what is your ecu numbers ?
RE: Porsche 986 boxter start issue - salaausi - 13-03-2019
(13-03-2019, 22:49 PM)ROD-BENDERS Wrote:(13-03-2019, 22:41 PM)salaausi Wrote: Looking for a help to fix my porsche 986 2004 starting issue.
I have swapped the engine with 996.
Only the ECU is replaced from 996. After all car only start once. When the second time try to start engine won't crank. But when disconnect the ecu plugs and reconnect again car starts again only once but not the second time.
Any fix for this?
Cheers.
Sounds like immo issue... i will look tomorrow see if immo off solution exists.... what is your ecu numbers ?
I have attached a photo of the 996 ECU.
Just wondering is that possible to find an immo chip from oem ecu and solder back in to 996 ecu. Will that even work that way? Not sure though.
Cheers.
RE: Porsche 986 boxter start issue - forkade - 14-03-2019
inside bosch cartronic
immo data
vin
miles
hour service
ignition of range 1 and 2
in chips 95p08
just clone this chip in your new DME bosch cartronic
wiht programer
read in old DME
save Dump in laptop
write in new DME
now cars start and drive perfect
RE: Porsche 986 boxter start issue - ROD-BENDERS - 14-03-2019
Depending on your ecu type look for eprom
95P08
or
95160
or
5P08C
It will be one of these three I believe
RE: Porsche 986 boxter start issue - forkade - 14-03-2019
95p08 is same 5po8c
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
in dme catronic bosch 5 connectic
only in 996 and 986 boxster and old cayenne 955 All model
----------------------------------------------------------
in dme cartronic bosch 5 connectic
find only 997 987c 987 boxster cayman Year 2005 2008 All model
95320 , 95po8 , 5po8c
---------------------------------------------------------
in 997gt3 rs facelift Year 2010
bosch cartronic 5 connectic
95640
---------------------------------------------------------
all continental dme 2 connectic
inside
only 95128
porsche cayenne 957 991 -997 987 mk2 Motor DFI- 981
---------------------------------------------------------
in knnow perfect this ecu
---------------------------------------------------------
XXXXXXXXXXXNEVER FIND 95160XXXXXXXXXXXX
RE: Porsche 986 boxter start issue - salaausi - 14-03-2019
(14-03-2019, 07:14 AM)forkade Wrote: inside bosch cartronic
immo data
vin
miles
hour service
ignition of range 1 and 2
in chips 95p08
just clone this chip in your new DME bosch cartronic
wiht programer
read in old DME
save Dump in laptop
write in new DME
now cars start and drive perfect
Did as you said now the car starts good. But I got transmission issue which blinks the P and 4 on the cluster.
Any idea?
RE: Porsche 986 boxter start issue - forkade - 14-03-2019
bro thanks for help
RE: Porsche 986 boxter start issue - salaausi - 15-03-2019
(13-03-2019, 22:49 PM)ROD-BENDERS Wrote:(13-03-2019, 22:41 PM)salaausi Wrote: Looking for a help to fix my porsche 986 2004 starting issue.
I have swapped the engine with 996.
Only the ECU is replaced from 996. After all car only start once. When the second time try to start engine won't crank. But when disconnect the ecu plugs and reconnect again car starts again only once but not the second time.
Any fix for this?
Cheers.
Sounds like immo issue... i will look tomorrow see if immo off solution exists.... what is your ecu numbers ?
Hi Mate,
Any option for immo off from my ecu?
Thanks.