DME pin out for bosch me 7.8 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: DME pin out for bosch me 7.8 (/showthread.php?tid=48075) |
DME pin out for bosch me 7.8 - salaausi - 16-03-2019 please help with pin out for this dme photo attached. ECU Bosch 0 261 206 579 996.618.604.00 Cheers RE: DME pin out for bosch me 7.8 - ROD-BENDERS - 16-03-2019 (16-03-2019, 10:31 AM)salaausi Wrote: please help with pin out for this dme With immo off file you say car start once then not again. Did you read the eprom again to see if it had changed back ? If it changed back you need to write protect the immo off file then it should work RE: DME pin out for bosch me 7.8 - salaausi - 16-03-2019 (16-03-2019, 10:52 AM)ROD-BENDERS Wrote:(16-03-2019, 10:31 AM)salaausi Wrote: please help with pin out for this dme I'm actually looking for complete pin out for this DME connector. Is it possible to find complete pin out? I checked the file in eeprom after 1st start. YES it changed only one LINE. How do I write protect the immo off file? (I attached a photo of the changes) Also If I disconnect the battery positive for 1-2 min and then try to start it starts again. But only once. Can't keep doing this for ever. Crazy! Do I need to change any file in the Immobilizer alarm unit or Main MCU also?(which is located under the front passenger seat) What I feel is there is somewhere in the MCU or FLASH stored immo part also. I have Full read the ECU file from KTAG. Can you please check if there any chance of get immo off from the ECU full read file. Cheers. RE: DME pin out for bosch me 7.8 - forkade - 17-03-2019 immo-off not working bosch cartronic 997 987 996 986 why insist my bro NO SOLUTION IMMO=OFF |