CarTechnoloGY
Op Com help - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Opel - Vauxhall - Holden (https://cartechnology.co.uk/forumdisplay.php?fid=59)
+---- Thread: Op Com help (/showthread.php?tid=48217)



Op Com help - scoop64 - 18-03-2019

Hi, brought a op com device off ebay, came with disc software, VAUX-COM_120309a+131223d ,loaded on to pc windows 7 64bit, connected to car (08 zafira)  not communicating with ECU.
picture is the one i have if it helps.thanks


RE: Op Com help - mattydr67 - 18-03-2019

There is a thread for this kind of problems so it wasn't need to open a new one.
But anyway. Try it using Op-COm China Clone 2010 software.
Do not try to reflash it no matter what because this tool has a "fake" MCU and you will brick it for good.
Good luck


RE: Op Com help - scoop64 - 18-03-2019

(18-03-2019, 19:58 PM)mattydr67 Wrote:  There is a thread for this kind of problems so it wasn't need to open a new one.
But anyway. Try it using Op-COm China Clone 2010 software.
Do not try to reflash it no matter what because  this tool has a "fake" MCU and you will brick  it for good.
Good luck

were would i get the download for Op-COm China Clone 2010 software ,would i need 1.45 1.59...? thanks


RE: Op Com help - mattydr67 - 19-03-2019

Usually op-com china clone is using fw1.39 but you can use it with any firmware version.
As I said do not try to reflash that MCU because you will brick it if you didn't it yet.
If you are using  "Search" button you can find it.
From Here you can download it
Good luck


RE: Op Com help - Mario68 - 19-03-2019

(18-03-2019, 20:36 PM)scoop64 Wrote:  
(18-03-2019, 19:58 PM)mattydr67 Wrote:  There is a thread for this kind of problems so it wasn't need to open a new one.
But anyway. Try it using Op-COm China Clone 2010 software.
Do not try to reflash it no matter what because  this tool has a "fake" MCU and you will brick  it for good.
Good luck

were would i get the download for Op-COm China Clone 2010 software ,would i need 1.45 1.59...? thanks

Here you have. (slow download)


RE: Op Com help - vectrac20tsri - 19-03-2019

opcom with fake mcu you must use opcom china 2010 regardless if they say V1.95 ect there are really V1.39.

If you do get one with a real mcu then 1.45 up you can use use opcom 2012/14 or if you downgrade to 1.39 for use on corsa c use opcom 2010.

only real mcu can be be flashed with with different versions.


RE: Op Com help - scoop64 - 24-03-2019

Thanks lads, that download mario68 added actually worked, found ABS fault, front right sensor,turned abs light off to, but it came back on again after 10 yards, will properly need new sensor but unfortunately its build into the hub on a zafira B,opel quoted me €340 for hub alone!


RE: Op Com help - Mario68 - 27-03-2019

So maybe look for the sensor on ebay or aliexpress.