A5 firmware/software update - question - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14) +--- Thread: A5 firmware/software update - question (/showthread.php?tid=48378) |
A5 firmware/software update - question - hrvoje - 21-03-2019 Hi all... I need help... I have Audi A5 (2010.) with B&O sound system... Software HNav_EU_P0022_D1. I want update to HNav 257_6 version... Need STANDARD install, or USER DEFINED? Possible trouble with B&O after standard instalation? Tnx... RE: A5 firmware/software update - question - Rainesh - 21-03-2019 User defined, and if you can't deselect AMP then let the update run. Afterwards reparametrisation needed with VCP if sound is bad. RE: A5 firmware/software update - question - hrvoje - 21-03-2019 (21-03-2019, 12:17 PM)Rainesh Wrote: User defined, and if you can't deselect AMP then let the update run. Afterwards reparametrisation needed with VCP if sound is bad. Tnx... I must deselect these folder: AMP_LC_P, AMPLCPKO, BO_D3, BO_Q7, and 3 DSP folder?...anything else? I want be sure... RE: A5 firmware/software update - question - MarcinOslo - 21-03-2019 I updated a month ago A5 2009 with B&O ,from P0022 to K0257. I tried user defined mode and unselect B&O amplifier ,but still was not possible. So I run update in standard mode including B&O and everythink went ok ,no need to parametrize B&O after update. I think this happened only with Bose. RE: A5 firmware/software update - question - hrvoje - 21-03-2019 (21-03-2019, 15:22 PM)MarcinOslo Wrote: I updated a month ago A5 2009 with B&O ,from P0022 to K0257.Tnx... I try with standard update...you are give me hope now... RE: A5 firmware/software update - question - playaz187 - 22-03-2019 only Bose sound system need to be disabled in user define menu B/o etc no need u can go as standard RE: A5 firmware/software update - question - hrvoje - 22-03-2019 I did it today...standard way...firmware and map...all went without problem... tnx all!! |