Renault clip Programing problem low voltage - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Renault - Dacia - Nissan - Infiniti (https://cartechnology.co.uk/forumdisplay.php?fid=57) +---- Thread: Renault clip Programing problem low voltage (/showthread.php?tid=48434) |
Renault clip Programing problem low voltage - alexbcn - 22-03-2019 Hello all. I have grand problem this Renault Clip. In work to Programing i have 12.5 - 12.6 voltage And No programing need 12.7 - 13.0 i have good Bosch voltage Boxter But problem low voltage..... Any ideas for rework china clone..... Thank RE: Renault clip Programing problem low voltage - flavio69 - 22-03-2019 Hi mate...I use to trick the system,follow the procedure and when you reach that point where asking for voltage 12.7-16.00,start the engine to raise the voltage and quickly turn off the engine and switch the key to +DC.(FEED)It will work,trust me! RE: Renault clip Programing problem low voltage - alexbcn - 22-03-2019 (22-03-2019, 14:34 PM)flavio69 Wrote: Hi mate...I use to trick the system,follow the procedure and when you reach that point where asking for voltage 12.7-16.00,start the engine to raise the voltage and quickly turn off the engine and switch the key to +DC.(FEED)It will work,trust me! Not 12.6 i out Thanks |