Using ETKA 7.3 with updates above 999 by changing update numbering - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: Using ETKA 7.3 with updates above 999 by changing update numbering (/showthread.php?tid=4852) |
Using ETKA 7.3 with updates above 999 by changing update numbering - teefix - 18-06-2014 Hello all I wonder if it is possible to change the update numbers internal to three digit numbers to be still able to install at 7.3 and preserve the VIN function... In a different forum I found a post from tekkno that this works, but no advise how to change the number (eg 1000 ==> 100). He claims, as long as it stays 3 digits. Does anybody have an idea how to do that? I tried a hex editor but the version number was not unique in the file... any suggestions? teefix RE: Using ETKA 7.3 with updates above 999 by changing update numbering - gilberto - 18-06-2014 Friend Write a good read on the message of Mr. Rui Aguiar and good luck: HERE! RE: Using ETKA 7.3 with updates above 999 by changing update numbering - teefix - 27-06-2014 Hey Gilberto Thank you for the answer. I read the thread but realized that this requires ETKA 7.4... That's not my aim as I want further to use 7.3. 7.4 does not support VIN identification... teefix |