+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW E90 CIC Flashing error (/showthread.php?tid=48566)
BMW E90 CIC Flashing error - Czozen - 25-03-2019
Hi,
I know there are a lot of threads here and on other boards but i didn't found my case anyware
Can anyone help?
Preconditions:
- Fan is spinning 100%,
- Black screen,
- All 3 ECU's are answering correctly CI63, CI62, CIA0.
Problem:
- Can not flash any of ECU by MOST always getting error of "wrong conversion" by WinKFP.
I did try to flash CI63 it with Expert Mode (WinKFP) By K-CAN cable (by ICOM can not even start to flash):
1. NAAB went ok 100% with information "Bootsector update OK"
2. Program always stuck on 51% (after about 16h-17h) with error in attachment.
3. Data went ok 100%,
Any advice?
RE: BMW E90 CIC Flashing error - duckdonald - 25-03-2019
does the optical port light up?
with which software version are you trying to flash?
RE: BMW E90 CIC Flashing error - semiix - 26-03-2019
most conncect and now program
RE: BMW E90 CIC Flashing error - Czozen - 27-03-2019
(25-03-2019, 17:03 PM)duckdonald Wrote: does the optical port light up?
with which software version are you trying to flash?
Yes, Red Light ist present in MOST connector.
Trying to flash in expert mode Spdaten V41
RE: BMW E90 CIC Flashing error - willisodhiambo - 27-03-2019
(27-03-2019, 10:08 AM)Czozen Wrote:(25-03-2019, 17:03 PM)duckdonald Wrote: does the optical port light up?
with which software version are you trying to flash?
Yes, Red Light ist present in MOST connector.
Trying to flash in expert mode Spdaten V41
When you run inpa ident or UIF with ICOM, what do you see?
RE: BMW E90 CIC Flashing error - atomantmk - 27-03-2019
(27-03-2019, 10:08 AM)Czozen Wrote:You don't have MOST connection, light must be green...(25-03-2019, 17:03 PM)duckdonald Wrote: does the optical port light up?
with which software version are you trying to flash?
Yes, Red Light ist present in MOST connector.
Trying to flash in expert mode Spdaten V41