+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Renault trafic, after gearbox change limp mode (/showthread.php?tid=49038)
Renault trafic, after gearbox change limp mode - Jancss - 03-04-2019
Hi all,
need help with car Renault trafic 2.5 tdi. Before car have automatic gearbox, now it is changed to manual. With car is possible to drive, but just in limp mode ...till 2800 rpm..
Here need make ecu remapp or adaption?
Need solution to possibilty drive normaly.
Thanks in advance
RE: Renault trafic, after gearbox change limp mode - rightpcb - 03-04-2019
You try changing configuration with clip ?
RE: Renault trafic, after gearbox change limp mode - Jancss - 04-04-2019
Till this moment nothing is changed in ecu or somewhere else , just changed gearbox with it module and wiring. I think ecu not correct understand what of gearbox is added.
RE: Renault trafic, after gearbox change limp mode - Jurebv - 06-04-2019
You need adaptation change but you could also remove limp mode but its not right way to do it
RE: Renault trafic, after gearbox change limp mode - Jancss - 08-04-2019
Ok, but what here is right way to do all correct? And which tool here will be better to use?
RE: Renault trafic, after gearbox change limp mode - Jurebv - 08-04-2019
renault can clip should be able to do it, if you dont have it post ur file here i can remove limp mode in flash
RE: Renault trafic, after gearbox change limp mode - Jancss - 08-04-2019
I havnt renault clip..car have bosch ecu edc16cp33 ..can i read it with mpps v18 or need ktag?
So, what about gearbox, because now diagnostics see autonatic gearbox, but really car now have manual.
Also now happen strange symptom. To see what type of ECU car I disconnect one connector(near ecu metal box) , not ECU and after that injectors from memory lose coding numbers.