+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Solved ✔ Difficulty getting PC to communicate with BMW X5 F15 via ENET (/showthread.php?tid=49720)
Pages:
1
2
Difficulty getting PC to communicate with BMW X5 F15 via ENET - fatfash - 17-04-2019
I am having difficulty getting my laptop to communicate with my X5 F15 via ENET. It can communicate with the car via ICOM but would not via ENE. I need help getting this resolved.
Thank you
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET - inspi1981 - 17-04-2019
It's Your network setup correct?
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET - sebastianfernandes - 17-04-2019
Ediabas setup up as “Enet”
Just use easyconnect utility and setup..
Interface - Enet
IP address - autodetect
And your network adapter should be set to automatic ip
Hope it helps..
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET - fatfash - 17-04-2019
Okay. Will try those out.
Thanks
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET - PhilipM - 17-04-2019
I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET - Spirit5676 - 17-04-2019
(17-04-2019, 17:52 PM)fatfash Wrote: I am having difficulty getting my laptop to communicate with my X5 F15 via ENET. It can communicate with the car via ICOM but would not via ENE. I need help getting this resolved.
Thank you
I assume ICOM is usein D-CAN to communicate with car. You can see which is being used in ISTA.
(17-04-2019, 19:30 PM)PhilipM Wrote: I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS
I've had to do the same.
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET - larshutten - 17-04-2019
If you first use ICom and straight after that enet cable I also experience issues. I always close drive door lock. Force sleep with ista. Wait till start button and hazard illumination is off. After that plug enet cable in obd. This works for me.
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET - fatfash - 17-04-2019
(17-04-2019, 19:30 PM)PhilipM Wrote: I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS
This was the last thing I did after several failed attempts. I used to do this when I had cloned ICOM, thought it was the ICOM that was the issue.
Thanks for this info
(17-04-2019, 20:07 PM)larshutten Wrote: If you first use ICom and straight after that enet cable I also experience issues. I always close drive door lock. Force sleep with ista. Wait till start button and hazard illumination is off. After that plug enet cable in obd. This works for me.
Thank you, will also consider this method
(17-04-2019, 20:07 PM)Spirit5676 Wrote:(17-04-2019, 17:52 PM)fatfash Wrote: I am having difficulty getting my laptop to communicate with my X5 F15 via ENET. It can communicate with the car via ICOM but would not via ENE. I need help getting this resolved.
Thank you
I assume ICOM is usein D-CAN to communicate with car. You can see which is being used in ISTA.
(17-04-2019, 19:30 PM)PhilipM Wrote: I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS
I've had to do the same.
Yes 100%, was confused when I sa this.
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET - e46ad - 17-04-2019
Net Work and connection settings bring up lan settings,
Set,
IPV4 Settings,
169.254.1.1
255.255.0.0
Works for me on all cars with ENET
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET - fatfash - 17-04-2019
Thanks, tried it also without success, but will give it a try again.