+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: NBT EVO Flash fail (/showthread.php?tid=49760)
Pages:
1
2
NBT EVO Flash fail - Qwerti - 18-04-2019
Hi! I tried the nbt evo update on bench, with enet cable, but not success. Can anyone help me, what is wrong?
RE: NBT EVO Flash fail - larshutten - 18-04-2019
What is your bench setup, how is enet wired?
RE: NBT EVO Flash fail - Qwerti - 18-04-2019
(18-04-2019, 17:51 PM)larshutten Wrote: What is your bench setup, how is enet wired?
Ignition emulator, and enet wired in the zgw.
RE: NBT EVO Flash fail - bmwcoder75 - 18-04-2019
Could you ping unit before starting? Always ping unit to make sure media is fine before flashing.
Now is the unit back to normal or stuck on blue screen?
Now can you ping unit or not?
RE: NBT EVO Flash fail - Qwerti - 21-04-2019
The ping is work fine also disconnected oabr. The unit come from g11. This ethernet wiring is not the same as f series. This is my problem. This oabr only two ethernet wire eth_bb_l and eth_bb_h.
RE: NBT EVO Flash fail - duckdonald - 21-04-2019
ETH is in oabr port,.. all 4 pin.
RE: NBT EVO Flash fail - Qwerti - 21-04-2019
(21-04-2019, 19:29 PM)duckdonald Wrote: ETH is in oabr port,.. all 4 pin.Same location as f series? But the wiring diagram not shown.
RE: NBT EVO Flash fail - bmwcoder75 - 21-04-2019
4 Ethernet still on OABR. Some G series (If not all, not 100% sure), simply have 2 Ethernet wires coming from BDC and 2 others from Telematic. They are split. Still your unit is using 4 pins on OABR as usual as far as I know.
So ping is still working right now?
RE: NBT EVO Flash fail - duckdonald - 21-04-2019
(21-04-2019, 19:45 PM)Qwerti Wrote:(21-04-2019, 19:29 PM)duckdonald Wrote: ETH is in oabr port,.. all 4 pin.Same location as f series? But the wiring diagram not shown.
that is not the network for communication and flash.
follow the attached diagram
RE: NBT EVO Flash fail - Qwerti - 22-04-2019
Ping is work fine, and the zgw ethernet diagnostic also, like a picture.