BMW F30 USED DSC HOW TO CODE - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW F30 USED DSC HOW TO CODE (/showthread.php?tid=49838) |
BMW F30 USED DSC HOW TO CODE - Bimmer540 - 20-04-2019 How to code used DSC on F30. RE: BMW F30 USED DSC HOW TO CODE - rs@chip - 20-04-2019 (20-04-2019, 10:11 AM)snypertje Wrote: How to code used DSC on F30. simply reflash and encode the module to match vin and softwere..Ista or esys will do the yob RE: BMW F30 USED DSC HOW TO CODE - Bimmer540 - 20-04-2019 (20-04-2019, 16:20 PM)rs@chip Wrote:(20-04-2019, 10:11 AM)snypertje Wrote: How to code used DSC on F30. Ista+ with used DSC? RE: BMW F30 USED DSC HOW TO CODE - RocketSurgeon - 20-04-2019 I think you would need to inject CAFD with E-sys before you could use ISTA+ RE: BMW F30 USED DSC HOW TO CODE - inspi1981 - 21-04-2019 (20-04-2019, 17:12 PM)snypertje Wrote:(20-04-2019, 16:20 PM)rs@chip Wrote:(20-04-2019, 10:11 AM)snypertje Wrote: How to code used DSC on F30. Why not? RE: BMW F30 USED DSC HOW TO CODE - Bimmer540 - 21-04-2019 (21-04-2019, 07:29 AM)inspi1981 Wrote:(20-04-2019, 17:12 PM)snypertje Wrote:(20-04-2019, 16:20 PM)rs@chip Wrote:(20-04-2019, 10:11 AM)snypertje Wrote: How to code used DSC on F30. Can You explain how to with ista+ and what do i need. RE: BMW F30 USED DSC HOW TO CODE - inspi1981 - 22-04-2019 Nothing special. Calculate measure plane, then mark exchange unit, recalculate measure plan and execute RE: BMW F30 USED DSC HOW TO CODE - Bimmer540 - 22-04-2019 (22-04-2019, 11:51 AM)inspi1981 Wrote: Nothing special. Calculate measure plane, then mark exchange unit, recalculate measure plan and executeI thought a used ecu programming/coding was not possible with ista+ RE: BMW F30 USED DSC HOW TO CODE - oceandiver86 - 22-04-2019 If the hardware "matches" ISTA+ works. If not, you can program it manually with esys. |