+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: Audi Q5 2018 LED headlight coding (/showthread.php?tid=49868)
Audi Q5 2018 LED headlight coding - kmodel99 - 21-04-2019
Hi! I've tried to adapt used right headlight to car, Audi Q5 2018. LED headlight, no MATRIX. I used flasher in VCP, choosed 80A907397D zip file in VCP, and inside file "8a907397d_039_LED.flash", cause 39 is right side, and 29 is left side. After it, headlight won't work, ECU is communication. I've compare it to left headlight, and there is difference that DATASET for left exist, and for right is "-----". How to set DATASET, or why it won't set after flasher?
In flasher I just select file, and then do "Flash SGO".
Code:
VCP+K v8.6.4.1 06.04.2019 DynaMo Edition Protokol autoscan 2019-04-20 16:49:31.506
--------------------------------------------------------------------------------------
VCP+K v8.6.4.1 06.04.2019 DynaMo Edition Protokol autoscan 2019-04-20 16:49:35.515
--------------------------------------------------------------------------------------
VCP+K v8.6.4.1 06.04.2019 DynaMo Edition Protokol autoscan 2019-04-20 16:50:07.414
--------------------------------------------------------------------------------------
Adressword : 39 (Sterowanie światłami z prawej strony} - J1023 LCM_MLBevo
Numer VAG : SW: 80A907397D HW: 80A907397D
Wersja SW : 0017
# Kodowanie :
ASAM: UDS, EV_LCMRightCONTIAU426 001009
DATASET: -----------
>>> Znalezione bledy
000011 (B200500) Zestaw danych nieważny (invalid dataset)
000013 (C119F00) Wersja reflektora niewiarygodna (headlamp version implausible)
****************************************************
Adressword : 29 (Sterowanie światłami z lewej strony} - J1018 LCM_MLBevo
Numer VAG : SW: 80A907397C HW: 80A907397C
Wersja SW : 0017
# Kodowanie :
ASAM: UDS, EV_LCMLeftCONTIAU426 001009
DATASET: 80B909519C
>>> Nie wykryto usterek.
****************************************************RE: Audi Q5 2018 LED headlight coding - Provag - 23-04-2019
why don't do it online?
RE: Audi Q5 2018 LED headlight coding - kmodel99 - 23-04-2019
(23-04-2019, 08:45 AM)Provag Wrote: why don't do it online?
I've done it online but it works good but have error on dash "turn signal malfunction", while turn signal works great.
I though it may be problem because one headlight is USA and one is ECE (car is USA, this which have error is ECE). Unfortunetaly, I don't save that error code... And now I don't know if this headlight or ECU is damaged or just problem because ECE and USA version. And now after new flash with VCP, it doesn't work. No light (JUST low beam and high beam, but it's on other light module).
RE: Audi Q5 2018 LED headlight coding - Provag - 24-04-2019
(23-04-2019, 19:39 PM)kmodel99 Wrote:(23-04-2019, 08:45 AM)Provag Wrote: why don't do it online?
I've done it online but it works good but have error on dash "turn signal malfunction", while turn signal works great.
I though it may be problem because one headlight is USA and one is ECE (car is USA, this which have error is ECE). Unfortunetaly, I don't save that error code... And now I don't know if this headlight or ECU is damaged or just problem because ECE and USA version. And now after new flash with VCP, it doesn't work. No light (JUST low beam and high beam, but it's on other light module).
u cant make them both usa or both ece?
the problem u have is because of coding . u cant have coding right for both usa and ece. so u have to choose 09 coding for usa with usa Headlight or viceversa
RE: Audi Q5 2018 LED headlight coding - kmodel99 - 24-04-2019
(24-04-2019, 07:04 AM)Provag Wrote:(23-04-2019, 19:39 PM)kmodel99 Wrote:(23-04-2019, 08:45 AM)Provag Wrote: why don't do it online?
I've done it online but it works good but have error on dash "turn signal malfunction", while turn signal works great.
I though it may be problem because one headlight is USA and one is ECE (car is USA, this which have error is ECE). Unfortunetaly, I don't save that error code... And now I don't know if this headlight or ECU is damaged or just problem because ECE and USA version. And now after new flash with VCP, it doesn't work. No light (JUST low beam and high beam, but it's on other light module).
u cant make them both usa or both ece?
Sure, but even if I buy second ece headlight, then both will be coded to usa (because car is USA), and then both will have faulty blinker. Am I right? I mean coding using ODIS, because VCP can't do it.
RE: Audi Q5 2018 LED headlight coding - Provag - 25-04-2019
if u buy another headlight usa u can code bcm for usa