BMW e46 316 Valvetronic delete 0x2A6 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: BMW e46 316 Valvetronic delete 0x2A6 (/showthread.php?tid=49907) |
BMW e46 316 Valvetronic delete 0x2A6 - Kayhan 17# - 22-04-2019 Hey guys, we have a problem with an e46 316 n46 motor, valvetronic is adaptable etc. but sporadically throws car in limp mode, so we want to get rid of this. Error codes from INPA 0x2A67 and 0x2A6B CEL and EML lights are on dashboard and i have disconnected VVT motor for now. Any solutions(attached dump) or ideas to quick fix? Bosch MV946 Me9+ HW 0261208388 SW 1037370310 Upg. SW 07546322 Regards RE: BMW e46 316 Valvetronic delete 0x2A6 - X-treme - 25-04-2019 Connect valvetronic motor and disconnect valvetronic sensor. I made some more dtc off, these dtc you get when disconnecting vvt sensor. Engine won't go in limp mode but has slightly less power then with valvetronic on. Try and report RE: BMW e46 316 Valvetronic delete 0x2A6 - MaW - 10-05-2019 Need the same solution for a e87 120i MV946 my errors: 0x2A59 VVT-Führungssensor 0x2A5B VVT-Referenzsensor 0x2C24 Vertauschte Lambdasonden 0x2A67 VVT-Ansteuerung THANKS RE: BMW e46 316 Valvetronic delete 0x2A6 - iyade46 - 12-05-2019 if you have teamviwer i can help you |