Solved ✔ Help Needed Siemens MSD80 Bmw 116i - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Solved ✔ Help Needed Siemens MSD80 Bmw 116i (/showthread.php?tid=49908) |
Help Needed Siemens MSD80 Bmw 116i - squadr33 - 22-04-2019 Hi guys, Wondering if anyone could help me with this one.. Its a BMW 116i 120bhp Ecu Siemens MSD80 HW: 07640015 SW: 07648488 Getting nox fault over & over, replacing nox sensor dont help, tried cleaning sensor, tried a lot. Wondering if anyone could help me by removing nox from the ecu. these DTC i keep getting:
deleting the dtc's all together is fine to, but nox off would be great Thanks in advance, File in attachment RE: Help Needed Siemens MSD80 Bmw 116i - SSAutoPerformance - 22-04-2019 (22-04-2019, 12:51 PM)squadr33 Wrote: Hi guys, Here u go, U must disconnect NOX PLUG!!! Passw in PM after THX and REP Enjoy! RE: Help Needed Siemens MSD80 Bmw 116i - squadr33 - 23-04-2019 (22-04-2019, 14:54 PM)SSAutoPerformance Wrote:(22-04-2019, 12:51 PM)squadr33 Wrote: Hi guys, thanks m8, rep and thanks given offcourse greets RE: Help Needed Siemens MSD80 Bmw 116i - squadr33 - 01-05-2019 worked great, thanks m8. this can be locked mod RE: Help Needed Siemens MSD80 Bmw 116i - SSAutoPerformance - 01-05-2019 (01-05-2019, 08:32 AM)squadr33 Wrote: worked great, thanks m8. You're Welcome! |