+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Bsi problem Immo of eprom 95080 (/showthread.php?tid=49958)
Pages:
1
2
RE: Bsi problem Immo of eprom 95080 - aladino81actia - 08-05-2019
look this
immotool
RE: Bsi problem Immo of eprom 95080 - RadovanPetkovic - 15-05-2019
IMMO OFF is not working in BSI. Virgin can be done (Fabric ... blanco) or to transfer the content of the Eeprom or the epoch itself physically to be replaced. It means the eprom that was original on the car to switch to the "new" BSI. This is my recommendation because you will save hours with Lexia and adjust the "factory" BSI to the car. So you will have to enter the entire car configuration in BSI. And it's normal to know which type of gearbox, radio, ABS ... And then everything works "only" mileage or fuel level or who knows what stupidity .....
When you replace Eeprom, everything is configured except that you can not start the car
Immobilizer ..... And this is not a problem only when it is known how and what. It's simple. After hours and hours of experience. It's only necessary to apply the keys to Lexia and everything is OK. Often, you can apply old keys if you do not accept them, you must use the NEW transponder .....And this is very simple and nobody will or will not know (who knows will not say). So after suffering with Peugot, Citroën and Renault, many people give up or scarring, and only procedures are working unknown and complicated ...... If they are respected no problem .....
Something else calculators or programs that modify Epromes often do not have for example Xsara but have for some Peugot where the same BSI is used so you need to look for and stab to make a good Virgin fail .....