+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: 【
Jaguar s type immo off? - jimbo2 - 03-05-2019
Hello all, I’ve been asked to get a project car started which is proving quite a challenge
My customer has swapped the entire drivetrain from a 1999 jaguar s type and fitted into his custom made chassis. He’s swapped over (nearly) everything. Engine,auto box,complete wiring loom with ecu’s Etc etc. The ignition powers up system but engine doesn’t turn over. I can see that system is immobilised by the flashing red light. He didn’t swap over the drivers door control module as he cut off the loom from the door pillar to the drivers door on old car! I can’t see me getting system operating as it should as it could have other components missing in the immobiliser circuit
Can anyone please advise how to disable immobiliser circuit completely? I know it goes through main Ecu and dash cluster, drivers door control unit and catch etc. Can I open up ecu and disable it completely?
Sorry for long post, any advice/suggestions/pointers much appreciated!
Cheers
Oh yes, it’s a 4.0 v8 petrol!!