ICOM A2 ori all LEDs red - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ICOM A2 ori all LEDs red (/showthread.php?tid=50470) Pages:
1
2
|
ICOM A2 ori all LEDs red - Stiffmaster - 05-05-2019 Hi, I have an ori BMW ICOM A2. It worked for many years now, but yet, it's not responsible anymore. If you connect it to obd socet, all LED's start continiously lighting red. Web IF is not avaiable. Tried to restore firmware, but also not working. Any ideas? Br Stiffi RE: ICOM A2 ori all LEDs red - Matthew53 - 05-05-2019 You need to remove chip K9F2G08U0BPCB0, solder one from donor, restore and update RE: ICOM A2 ori all LEDs red - Stiffmaster - 05-05-2019 Ok, thank you for the info. Do you have a spare one?¿ Br ... ordered one online Thank you very much RE: ICOM A2 ori all LEDs red - ferrum - 05-05-2019 It may not be related to chip K9F2G08U0BPCB0 If the red LEDs are constantly on, it means that the mega16 does not start, but this can not be connected with the nand flash RE: ICOM A2 ori all LEDs red - Matthew53 - 05-05-2019 (05-05-2019, 18:58 PM)ferrum Wrote: It may not be related to chip K9F2G08U0BPCB0 Ok, so what's the other way to restore it? RE: ICOM A2 ori all LEDs red - sebastianfernandes - 05-05-2019 First just try to reheat the Atmel Atmega 16L or 16A whichever one you have with a hot air station. If not solved replace the chip with a new one. RE: ICOM A2 ori all LEDs red - Matthew53 - 05-05-2019 (05-05-2019, 20:46 PM)sebastianfernandes Wrote: First just try to reheat the Atmel Atmega 16L or 16A whichever one you have with a hot air station. If not solved replace the chip with a new one. reheating will only work temporarily, sooner or later the problem will be back RE: ICOM A2 ori all LEDs red - Stiffmaster - 05-05-2019 Is it possible to change the mega16, too or is there some kind of special software on it, that‘s not easy flashable?¿ Tomorrow, I‘ll try with reheating. Br RE: ICOM A2 ori all LEDs red - Matthew53 - 05-05-2019 (05-05-2019, 20:58 PM)Stiffmaster Wrote: Is it possible to change the mega16, too or is there some kind of special software on it, that‘s not easy flashable?¿ New mega16 isn't possible to flash, because firmware is locked. You need donor. RE: ICOM A2 ori all LEDs red - Stiffmaster - 06-05-2019 Ok, than now the question: do you have one spare |