Solved ✔ RNS 510 how make update firmware? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14) +--- Thread: Solved ✔ RNS 510 how make update firmware? (/showthread.php?tid=50624) |
RNS 510 how make update firmware? - benzprod - 09-05-2019 Hello, i have RNS 510 from passat and i wan't to update firmware because is not possible to change language in RNS 510. Dash is in french but rms 510 is in deutsch Normally with update rns 510, prolem are solved. I don't know what version of firmware choose. I have in my passat CC, this modele of RNS 510: Part number 1T0035680C HW version H06 Sw version 2720 Hw vehicle 0xc801 You know if it's possible to make update firmware and what firmware choose please ? Thank you for you help. RE: RNS 510 how make update firmware? - brog123 - 09-05-2019 Last FW for your radio is SW2850. I am not sure if link is still valid, but you can try: If helped Thanks + Rep. Rule 3: Do not Post Links on the Board! External links must be attached in a notepad file. Thanks, Admin Like this RE: RNS 510 how make update firmware? - benzprod - 09-05-2019 ok, i try. you are sure this FW is compatible for me? RE: RNS 510 how make update firmware? - brog123 - 09-05-2019 This is the last one for unit C with H06. RE: RNS 510 how make update firmware? - benzprod - 09-05-2019 okey did you ever do that? To help me for procedure RE: RNS 510 how make update firmware? - brog123 - 11-05-2019 Yes I did many times but with newer units, but the procedure is the same. It is pretty easy infact. I will have to find it, but will post tomorrow. Found it PROCEDURE FOR UPDATE RNS-510 First of all, download the firmware you want to install. Burn it using Nero, UltraISO or another program at the lowest speed possible. Preferably on DVD + R, even if CD (if there is above). Requirements: 1. battery charge 2. if you perform a downgrade, that is going to install a previous FW to enable you to downgrade your service menu of your ships. Steps: 1. Open the machine. 2. DO NOT put the key in the ignition! 3. Using the power button, turn on the RNS-510. 4. Extract from RNS-510 CD or DVD and SD card if they were entered. 5. Insert the CD – DVD containing the new software. 6. RNS-510 should reset after a while and ask you to confirm your action, you must click OK. 7. Wait a few minutes and you'll get a question, click OK again. 8. Start the update process, which takes approximately 55 minutes, with the RSN-510 will reboot several times, also turns off the screen in some cases, do not be nervous, be patient and tight ass! 9. Wait for the download to finish, at the same time, a message "Your upgrade sistem OK! Reasons .....". 10. when it comes out on CD - DVD (automatically) remove it and 'RNS-510 will reboot. RE: RNS 510 how make update firmware? - benzprod - 13-05-2019 solved thanks or you helping |