NISSAN NOTE CHANGE OF ECU - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: NISSAN NOTE CHANGE OF ECU (/showthread.php?tid=50814) |
NISSAN NOTE CHANGE OF ECU - Black Alien - 13-05-2019 hello friends Due to a failure to program key by both OBD and bench programmer on a nissan note lately poste 2006 japan made.. a solution to find ECU that uses unprogrammed key was the solution.. ECU with no key security is here...what do ineed to disconect on the car for the engine to start.? some said BCM some said BCM has to have immo off/total reception file as well for the ECU to work. help a brother regards RE: NISSAN NOTE CHANGE OF ECU - raffy haddad - 13-05-2019 Only key probleme ? Usually if the ecu not damged you don't need to change it I had couple of problems on a nissan that don't accept key to be programmed the problem is in bcm failure Try to bring used bcm and programmed to car Very easy RE: NISSAN NOTE CHANGE OF ECU - Black Alien - 14-05-2019 (13-05-2019, 17:02 PM)raffy haddad Wrote: Only key probleme ? well thanks for the hint..i will look for another BCM and do the programming by OBD this is my first time to encounter such a problem..i have programmed a loot of nissan of this type using x100. it is simple as you said brother..just 3 minutes and you are done but this one was the toughest |