CarTechnoloGY
Solved ✔ Citroen C4 BSI dead. - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ Citroen C4 BSI dead. (/showthread.php?tid=50845)



Citroen C4 BSI dead. - funfunk - 13-05-2019

Hi, I kill total Citroen C4 BSI. Signature DC.04
Device don't found via OBD or connector's by FVDI.
Can't flash...

If I found new BSI with different signature, what is better way clone BSI.
Eeprom is OK!

Brg,
funfunk

[attachment=95391]


RE: Citroen C4 BSI dead. - Jancss - 13-05-2019

You need find bsi with same identification numbers (part nr., Boot and hard nr.) See your bsi for backside and side labels


RE: Citroen C4 BSI dead. - helmi reguig - 13-05-2019

bsi in mode boot not dead


RE: Citroen C4 BSI dead. - Jancss - 13-05-2019

You need find bsi with same identification numbers (part nr., Boot and hard nr.) See your bsi for backside and side labels.
Best way is flash file on the table with fvdi


RE: Citroen C4 BSI dead. - sab_bane - 13-05-2019

I think one of solution is extract pin code from eeprom and make virgin of second bsi and make telecoding with diagbox


RE: Citroen C4 BSI dead. - helmi reguig - 13-05-2019

https://cartechnology.co.uk/showthread.php?tid=27788

use fvdi program new flach DC.04


RE: Citroen C4 BSI dead. - funfunk - 13-05-2019

Hi, can't flashing: target unit does not respond!
From OBD or connectors.
First kill to boot mode, then try restore with ok flash with FVDI, that dont working.
Then try flash with obdstar x300 dp pro, write flash & eep,
after that: TOTAL DEAD BSI.

Brg,
funfunk

Hi, only way. If I have wrong pinout for bench!

I have use that.

-funfunk-


RE: Citroen C4 BSI dead. - funfunk - 14-05-2019

Hi, now changed new BSI & ECU.

Coded keys, radio.... DONE!

-funfunk-