CarTechnoloGY
Help Renolink Programming UCH - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Renault - Dacia - Nissan - Infiniti (https://cartechnology.co.uk/forumdisplay.php?fid=57)
+---- Thread: Help Renolink Programming UCH (/showthread.php?tid=50852)



Help Renolink Programming UCH - aljot - 13-05-2019

Hi. I need your help, with the handling of renolink. I have a Renault Symbo UCH that is virgin and I want to program it with the PCM of my car but not use renolink and when I try to do the APV code procedure I get the rejection message to the operation, some could explain me how to program a UCH virgin. Thank you very much for your help.


RE: Help Renolink Programming UCH - Renopower - 14-05-2019

You must go to extra menu and than keys, there fill in isk and pin, that should be working


RE: Help Renolink Programming UCH - aljot - 14-05-2019

hello, but in the keys menu, it's blank. the UCH is a virgin. I do not have an ISK or PIN to program.


RE: Help Renolink Programming UCH - Renopower - 15-05-2019

Than i think it will not work, you must read the pin and the isk from old uch,
than you must place the virgin uch and put pin and isk there.
With blank uch you can use the clip,with the pinextractor that should work.
Thanks