CarTechnoloGY
seat immo code - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: seat immo code (/showthread.php?tid=50906)



seat immo code - stm - 15-05-2019

Hi i have a seat leon in shop wich has instrument cluster problem and i want to replace the cluster i have copy the 93c86 epprom from one to other but car refuses to start.With the old dash the car starts but the needles does not work. if someone can extract me the pin code to start a key programming it would be appriciated.or a working solution it would be good for me.


RE: seat immo code - darek_naprawa - 15-05-2019

Pin code 01650.........


RE: seat immo code - stm - 16-05-2019

this is the pin of the original cluster but does not login with the new cluster. and i have write the eprom from ori to the used cluster anyone can help with this....


RE: seat immo code - raffy haddad - 16-05-2019

you need both pin code so you can adapt to car
keep the original data onto the second cluster and post here
so members can help you to get second pin code
regards


RE: seat immo code - stm - 16-05-2019

[quote="raffy haddad" pid='447962' dateline='1558004976']
you need both pin code so you can adapt to car
keep the original data onto the second cluster and post here
so members can help you to get second pin code
regards
[            


i have done a big mistake with the new cluster i have done a copy of the ori epprom and havent keep the clusters data.is there a way to recover?


RE: seat immo code - raffy haddad - 16-05-2019

check your new dash eeprom reread and compare it with old eeprom
are they the same maybe something wrong when writing
cloning fron old to new should work


RE: seat immo code - stm - 16-05-2019

(16-05-2019, 13:19 PM)raffy haddad Wrote:  check your new dash eeprom reread and compare it with old eeprom
are they the same maybe something wrong when writing
cloning fron old to new should work

ok i will check that.if i replace the epprom from old to new will work?
because i dont need the other dash.


RE: seat immo code - raffy haddad - 16-05-2019

it should try it
regards


RE: seat immo code - stm - 17-05-2019

(16-05-2019, 15:20 PM)raffy haddad Wrote:  it should try it
regards

wich is the memeory because i am going crazy with that dash.its 93c86 underneath the tach motor?

i check the copy with hex editor and the two files are identical


RE: seat immo code - volodea - 26-05-2019

(17-05-2019, 06:02 AM)stm Wrote:  
(16-05-2019, 15:20 PM)raffy haddad Wrote:  it should try it
regards

wich is the memeory because i am going crazy with that dash.its 93c86 underneath the tach motor?

i check the copy with hex editor and the two files are identical

Hello. I have made the same mistake on passat b5.5. After copying eeprom into second hand clusters, the immo was blinking. After adapt both keys into the instrument cluster, it worked ok. The passat b5.5 has eeprom and flash. Need to be copyed both or swapped both to the new ipc. Give a sign if readdaptation for the keys worked ok after eeprom copy to new ipc you have from second hand. I have used avdi clone and supervag tool.