Experience with FVDI J2534 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69) +---- Thread: Experience with FVDI J2534 (/showthread.php?tid=50966) |
Experience with FVDI J2534 - ocostel - 16-05-2019 Hi mates, Someone works with FVDI J2534 tool ? It's good ? Can do programming on Ford modules ? RE: Experience with FVDI J2534 - vanos325i - 16-05-2019 Yes, I use this interface with IDS V113. Perfect, injector coding, read/erase error codes, datalogger, etc. Win7/8/10 32bit/64bit. (16-05-2019, 08:26 AM)ocostel Wrote: Hi mates, RE: Experience with FVDI J2534 - catablu - 30-05-2019 (16-05-2019, 08:52 AM)vanos325i Wrote: Yes, I use this interface with IDS V113. Perfect, injector coding, read/erase error codes, datalogger, etc. Win7/8/10 32bit/64bit. i do not recommend for programming. I tried pcm reprogramming and fried a sid803 on a 2005 ford c-max . For diagnose purpose is a medium interface, it has some problems. |