PEUGEOT 206 ME7.4.4 immo off help

PEUGEOT 206 ME7.4.4 immo off help - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: PEUGEOT 206 ME7.4.4 immo off help (/showthread.php?tid=51041)

Pages: 1 2

PEUGEOT 206 ME7.4.4 immo off help - keyzex - 17-05-2019

Help me with immo off, dump read with Ktag.

Brand: PEUGEOT 206 1.6 16V 2003 NFU 109Hk (No A/C)

Bosch 0 261 208 101
ME7.4.4

HV: 0261208101
SW: 103736631

Gladly instructions if needed more than writing Immo off files

29F400_95160.rar
File Type:
Downloaded:	24 times
Size:	206.85 KB

RE: PEUGEOT 206 ME7.4.4 immo off help - Sergiy - 17-05-2019

immo of.rar
File Type:
Downloaded:	21 times
Size:	203.55 KB

RE: PEUGEOT 206 ME7.4.4 immo off help - keyzex - 17-05-2019

Thanks for the help, but it doesn't start.

I've tried both eep1 and eep2-off

RE: PEUGEOT 206 ME7.4.4 immo off help - Le-Mans - 17-05-2019

Here immo off under

RE: PEUGEOT 206 ME7.4.4 immo off help - Yhoni - 03-09-2019

(17-05-2019, 15:18 PM)Le-Mans Wrote: Here immo off

Hello Le-Mans, in your file only have a flash 29f400 file, do not have 95160 eeprom file.

Is not 95160 eeprom Immo off neccessary ?

RE: PEUGEOT 206 ME7.4.4 immo off help - Le-Mans - 03-09-2019

(03-09-2019, 17:50 PM)Yhoni Wrote:
(17-05-2019, 15:18 PM)Le-Mans Wrote: Here immo off

Hello Le-Mans, in your file only have a flash 29f400 file, do not have 95160 eeprom file.

Is not 95160 eeprom Immo off neccessary ?

.....

RE: PEUGEOT 206 ME7.4.4 immo off help - Yhoni - 03-09-2019

(03-09-2019, 19:19 PM)Le-Mans Wrote:
(03-09-2019, 17:50 PM)Yhoni Wrote:
(17-05-2019, 15:18 PM)Le-Mans Wrote: Here immo off

Hello Le-Mans, in your file only have a flash 29f400 file, do not have 95160 eeprom file.

Is not 95160 eeprom Immo off neccessary ?

use this mate pass in your pm

Excuse me Le-Mans but the second file is empty, could you fix it?.

Thank you.

RE: PEUGEOT 206 ME7.4.4 immo off help - Le-Mans - 03-09-2019

Sorry mate here correct archive same pass

RE: PEUGEOT 206 ME7.4.4 immo off help - Yhoni - 03-09-2019

Le-Mans Wrote:Sorry mate here correct archive same pass

Ok mate, i will test it.

Thank you.

RE: PEUGEOT 206 ME7.4.4 immo off help - Yhoni - 06-09-2019

Hi Le-Mans, I have tried the two files that you have shared but with neither file of the two the car has started.

First I recorded the flash and left the original car eeprom but it didn't start.

Then record the second file consisting of flash 29f400 and the eeprom but the car did not start either.

I thank you very much for sharing your files.

Can you think of any other option to remove the immobilizer from this ECU 7.4.4?

Thank you.

[Image: 6N9P25D.jpg]