+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F10 Dynamic CC + Lim stop working after Navi CIC und 6wa install! (/showthread.php?tid=51077)
F10 Dynamic CC + Lim stop working after Navi CIC und 6wa install! - radoslavkoev - 18-05-2019
Hi I have retrofitted 6wa and Navi CIC wheel from f10 in to Bmw F10 05/2011.
However, Lim and DCC stoped working while Multifunction works at full.
NOTE:!!!!
- before all the modes car had Tacho und Navi, DCC and lim working
- Vin: C664657
Dynamic CC and LIM stoped work....
RE: F10 Dynamic CC + Lim stop working after Navi CIC und 6wa install! - sameur10 - 18-05-2019
(18-05-2019, 12:15 PM)radoslavkoev Wrote: Hi I have retrofitted 6wa and Navi CIC wheel from f10 in to Bmw F10 05/2011.Hi
However, Lim and DCC stoped working while Multifunction works at full.
NOTE:!!!!
- before all the modes car had Tacho und Navi, DCC and lim working
- Vin: C664657
Dynamic CC and LIM stoped work....
Update ICM and your ZGW it is problem of i-level miss match
RE: F10 Dynamic CC + Lim stop working after Navi CIC und 6wa install! - radoslavkoev - 18-05-2019
(18-05-2019, 17:36 PM)sameur10 Wrote:hi(18-05-2019, 12:15 PM)radoslavkoev Wrote: Hi I have retrofitted 6wa and Navi CIC wheel from f10 in to Bmw F10 05/2011.Hi
However, Lim and DCC stoped working while Multifunction works at full.
NOTE:!!!!
- before all the modes car had Tacho und Navi, DCC and lim working
- Vin: C664657
Dynamic CC and LIM stoped work....
Update ICM and your ZGW it is problem of i-level miss match
What exactly do I have to do?
I tried this ...
ICM->3000-Daten,F8->LDM_SLD_Funktion-> ein
ICM->3000 Daten, F8->LDM_Umschaltung_ACC_DCC->zulassen
KOMBI->3003 FZG_Ausstattung, 10->SLD_ENABLE->aktiv
ICM->3000 Daten, F8->LDM_SET_Taste->nur_SET__O
RE: F10 Dynamic CC + Lim stop working after Navi CIC und 6wa install! - zeronoo - 19-05-2019
flash zgw and icm with esys, had same problem after kombi updated to latest sw, all ok after zgw and icm update
RE: F10 Dynamic CC + Lim stop working after Navi CIC und 6wa install! - radoslavkoev - 23-06-2019
Can someone help?
Thank you for your time.
RE: F10 Dynamic CC + Lim stop working after Navi CIC und 6wa install! - rana - 23-06-2019
here is it , do that