CarTechnoloGY
EDC16C34 1.6 HDI Peugeot 307 Stage 2 NO POWER!!! - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: EDC16C34 1.6 HDI Peugeot 307 Stage 2 NO POWER!!! (/showthread.php?tid=51079)



EDC16C34 1.6 HDI Peugeot 307 Stage 2 NO POWER!!! - vmc993 - 18-05-2019

Hello! I have attached my ECU file, a modded stage 2 egr, dpf and limp mode off file, can anybody look or fine tune this file because car wont pull it's like an sdi I have to rev it hard to pull, I have checked and cleaned turbo vnt, intercooler, piping, injectors, engine wont eat oil, I think its a software problem not hardware...
It's something strange...
Thanks!


RE: EDC16C34 1.6 HDI Peugeot 307 Stage 2 NO POWER!!! - walshy155 - 18-05-2019

Put stage 1 back in and check if there's an improvement, to me sounds like vnt setting in your map


RE: EDC16C34 1.6 HDI Peugeot 307 Stage 2 NO POWER!!! - vmc993 - 18-05-2019

Stage 2 i'ts better than 1 or original... but with 5%


RE: EDC16C34 1.6 HDI Peugeot 307 Stage 2 NO POWER!!! - walshy155 - 18-05-2019

Yeah I know what you mens but I'm trying to say try stage 1 to see if there is a difference in how hard you have to rev the car, it sounds like a VNT problem if you have to rev it hard, most turbos though after 3000rpm go into PID Co trol, if there's a difference in the map it's probably VNT or maybe a boost leak, check diagnostics, check sensor readings requested vs actual then go from there