G30 US to ECE rear fog light and sidemarkers - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: G30 US to ECE rear fog light and sidemarkers (/showthread.php?tid=51228) |
G30 US to ECE rear fog light and sidemarkers - apexturbo - 21-05-2019 Hello dear CarTechnology colleagues, i have 2 issues where i would need an advice: 1. US G30 with ECE full led headlights - both FLM modules throw Sidemarker errors (I assume its the orange little lights which were available only in US headlights and not in the fittet ECE headlights) - what should be modified in FLM modules (or BODY?) to have the errors gone away? 2. Installed ECE light switch with Rear Fog. Enabled NSL_VERBAUT -> Aktiv in BODY module, so now the fog light comes up in the dash, but not the rear foglights itself. What should be edited more as I can't seem to find the MAPPING options like it was on the F series? Thanks and REP guaranteed for the help! RE: G30 US to ECE rear fog light and sidemarkers - TBGaming - 22-05-2019 Why don’t you code the whole car with ece typeshlussel except ACSM and DME? RE: G30 US to ECE rear fog light and sidemarkers - apexturbo - 22-05-2019 Thats what i started doing and saw your same opinion and now it all works! Thanks!!! RE: G30 US to ECE rear fog light and sidemarkers - apexturbo - 22-05-2019 just a small update: all is working after the mentioned solution up, but there is one remaining error: SZL wrong variant installed (needs coding). What should be changed regarding SZL for the error which appeared after Coding the BODY module with the ECE typeschluessel? Thanks ! RE: G30 US to ECE rear fog light and sidemarkers - kubixix - 22-05-2019 (22-05-2019, 15:11 PM)apexturbo Wrote: just a small update: all is working after the mentioned solution up, but there is one remaining error: SZL wrong variant installed (needs coding). Use NCD/CAFD Tool to compare us/ece and then you have a solution. RE: G30 US to ECE rear fog light and sidemarkers - MaroxiFXX - 22-05-2019 (22-05-2019, 06:20 AM)TBGaming Wrote: Why don’t you code the whole car with ece typeshlussel except ACSM and DME? Why not a DME? RE: G30 US to ECE rear fog light and sidemarkers - pweber84 - 25-05-2019 Different emission standards, car will be in LIMP mode |