+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: CAS2 Swap (/showthread.php?tid=51351)
CAS2 Swap - left1980 - 24-05-2019
Hello guys!
I m new to eeproms flashing. I want to change a CAS2 from E60 61356965050 5wk 7995 with a used one.
If i read from my CAS the internal eeprom of mc9s12dg with xprog , then read and erase donors eeprom and write with my CAS file, will the car start? And allign ews/dme of course.
Thanks in advance
RE: CAS2 Swap - rs@chip - 24-05-2019
(24-05-2019, 11:47 AM)left1980 Wrote: Hello guys!
I m new to eeproms flashing. I want to change a CAS2 from E60 61356965050 5wk 7995 with a used one.
If i read from my CAS the internal eeprom of mc9s12dg with xprog , then read and erase donors eeprom and write with my CAS file, will the car start? And allign ews/dme of course.
Thanks in advance
yes.. swap eeprom and flash/update cas with corect ZB number would be best way, ofcourse you can swap flash too but depend of what s wrong with your old one (corupted or not) thats why flash by winkfp ot ista-p is always better
RE: CAS2 Swap - left1980 - 24-05-2019
You mean swap eeprom physically desolder and solder or swap files? Old cas has water damage, will not switch kl15.
RE: CAS2 Swap - rs@chip - 24-05-2019
(24-05-2019, 13:12 PM)left1980 Wrote: You mean swap eeprom physically desolder and solder or swap files? Old cas has water damage, will not switch kl15.
no mate swap eeprom data only..than finish the yob with winkfp or ista-p
RE: CAS2 Swap - left1980 - 25-05-2019
ok, understand, thanks!
i ll give a try and post results