+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: VAG CAN PRO 5.5.1 clone help (/showthread.php?tid=51360)
VAG CAN PRO 5.5.1 clone help - beg1 - 24-05-2019
Hello everyone. Today im received china clone vag can pro, but i have a problem when try to connect to ecus.
I can connect to 01- engine without problems, but connection to others units isnt possible. I got a message after trying to connect: Error opening communiucation with ECU.
RE: VAG CAN PRO 5.5.1 clone help - ototest - 24-05-2019
(24-05-2019, 14:00 PM)beg1 Wrote: Hello everyone. Today im received china clone vag can pro, but i have a problem when try to connect to ecus.
I can connect to 01- engine without problems, but connection to others units isnt possible. I got a message after trying to connect: Error opening communiucation with ECU.
Change TJA1050 you can use 1020
RE: VAG CAN PRO 5.5.1 clone help - Willinickersen - 26-05-2019
May be you try CAN on an KLine car
RE: VAG CAN PRO 5.5.1 clone help - Tonza - 27-05-2019
I have same problem with same sw version.
Can anyone confirm that this clone tool work for him?
RE: VAG CAN PRO 5.5.1 clone help - podlbo - 05-06-2019
in my case of clone VCP i have problem with bad soldering... i did check all the soldering and fix what it seems to be bad or poor soldering. After this i have no problem connecting to all of controlers on my car.
RE: VAG CAN PRO 5.5.1 clone help - ruisam - 05-06-2019
with your clone you have the function of the adjustment and adaptation unlocked in any control device of the car?
RE: VAG CAN PRO 5.5.1 clone help - Willinickersen - 12-06-2019
I think you need to learn how to use this wonderful program....
RE: VAG CAN PRO 5.5.1 clone help - al70 - 16-06-2019
(05-06-2019, 05:46 AM)podlbo Wrote: in my case of clone VCP i have problem with bad soldering... i did check all the soldering and fix what it seems to be bad or poor soldering. After this i have no problem connecting to all of controlers on my car.
hi, i'm having problems with my vag can pro also, all drivers install properly but no communication with ecu, would you please if possible to send me some pics of your pcb, i got a feelimg that the problem is bad soldering also, cheers and goodluck
RE: VAG CAN PRO 5.5.1 clone help - podlbo - 26-06-2019
i did check all differend pictures of PCB on Aliexpress to find out what good soldering shoud look. I can take appart my VCP cable and take pictures if you still need - at this time my cable works OK. You can take picture of your pcb (front and back), maby someone can spot something to fix.
RE: VAG CAN PRO 5.5.1 clone help - al70 - 26-06-2019
(26-06-2019, 12:31 PM)podlbo Wrote: i did check all differend pictures of PCB on Aliexpress to find out what good soldering shoud look. I can take appart my VCP cable and take pictures if you still need - at this time my cable works OK. You can take picture of your pcb (front and back), maby someone can spot something to fix.
hi podlbo, thanks for reply, i would really appreciate if you would send me pics of your PCB, at least i know that yours is working so if anything is differemnt on mine i can rework, thanks again and goodluck.