Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56) +---- Thread: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED (/showthread.php?tid=5157) |
RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - Roger B. - 11-04-2017 Well..... found a torrent elsewhere online with the programm and installed that..... RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - zzapp - 30-01-2018 Hi, hope someone can help me with this: i've just received from aliexpress my Lexia3 V48. I've installed daemontools but when i try to run installation from the iso i receive an error with a crash of installation utility. i made a video to show you my problem: https://mega.nz/#!XFEjWDBK!Y67cif85nImjq9IjujK0vXTZwxjuIUAX5LTnCFtIxTw my laptop has win 7 64bit. i've tried to run installer both from the dvd i received with the lexia, and with the installer i've downloaded from link provided. hope you can help me. tks RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - Simple - 30-01-2018 Lexia would not install on 64bit Windows, read the posts to find ways of overcoming this issue. RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - nek13 - 04-02-2018 Hello colleagues I have a problem, with the installation, I have activation error 0, does anyone know what the problem is ?, I mention it is win7_64bit but I have already done the settings that are discussed on page 12 thanks! RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - Simple - 04-02-2018 If you read the first post, you will notice a big bold statement on top of the video saying: Use only 32bit windows Please go through the thread before posting. RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - mashbury - 03-03-2018 Hi everyone, New to DiagBox but learning fast. Have set up XP in VirtualBox and installed successfully to 7.02. In order to test everything OK so far I tried to look at documentation (for any vehicle) but I just get the error message (after a while) of `Failure to Display - impossible to view the documentation’. I have followed all Simple’s instructions AFAIK, except don’t have a VCI available (yet) to connect. A possible clue is that it also takes about 5 mins to close the application and shut down. Any ideas of what could be wrong? Thanks in advance. RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - andrewbishop - 23-03-2018 Hi All So my laptop that i had diagbox loaded on has finally died what are the restrictions on a replacement can i run it in vmware ect as I know when i installed this a few years back it was xp only will i have to update my vci ect thanks For any help Andrew RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - darmogandul - 01-08-2018 (05-07-2014, 06:09 AM)scarymistake Wrote: Update DiagBox V7 Allready PATCHED Dear scarymistake.. in first, sorry for my quest. as a new in car programming field, i'm want (and i hope u understand) really begin with Diagbox v7.x unactified state. i know u a senior with this situation n can u tell me what must i doing for actified that tools.. cheers n wait for u att. RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - maxwill2010 - 01-09-2018 Good Evening! I got my diagbox working! An advice i give u guys, after de 7.02 make a copy of the APPDIAG.SYS as Simple explained. Littel tip here. For every time u do an update and its ask for run DIAGBOX, after the install copy the APPDIAG.SYS to the folder Simple explained. U will get a perfect install with no errors, running 7.83 here just fine. Thanks Simple and Maitresox and everybody who provide us with the updates. Hope it can help. RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - Daniel_IL - 16-09-2018 Hi Please help when install update 7.60 to 7.61, diagbox show error "\APP\DDC\bin\psalance.exe can not run app because having config error. Possible resolve is install again this app" im click OK and chose Peugeot ... model.... enter vin, and run Planet, then show me info "can not connect interface because another app use it". Im disconnect lexia, plug usb again and Planet run OK, and works good. Im not understand whats happend? |