+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio , NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Desoldering/soldering chips (/showthread.php?tid=5161)
Desoldering/soldering chips - xipsilon - 05-07-2014
Hello everyone,
maybe it is not directly connected to the forum topic, but I wanted to ask experienced members what tools they use to desolder smd chips on ecu boards, and what would you recommend. Maybe hot air station or IC welding station with infra red heating...
RE: Desoldering/soldering chips - domelec - 05-07-2014
Hot air is good with correct nozzles for chip types
RE: Desoldering/soldering chips - mrriadh - 05-07-2014
(05-07-2014, 13:50 PM)xipsilon Wrote: Hello everyone,
maybe it is not directly connected to the forum topic, but I wanted to ask experienced members what tools they use to desolder smd chips on ecu boards, and what would you recommend. Maybe hot air station or IC welding station with infra red heating...
Hey m8 here's a good tuto watch it and learn https://www.youtube.com/watch?v=dBzQwnlp_yk
hot air gun and some other tools well look at ebay u will find the hole kit
RE: Desoldering/soldering chips - counder2000 - 19-08-2014
(05-07-2014, 13:50 PM)xipsilon Wrote: Hello everyone,hot gun do the jobs . with good soldering paste
maybe it is not directly connected to the forum topic, but I wanted to ask experienced members what tools they use to desolder smd chips on ecu boards, and what would you recommend. Maybe hot air station or IC welding station with infra red heating...
RE: Desoldering/soldering chips - aaronm0056 - 20-08-2014
Ive got a gas soldering iron i got from maplins and i bought seperate tips that came with a heat blower. This is the best thing ive used to desolder smd chips EVER!!
bit of flux on the legs use heat blower on legs for about 5-10 seconds and chip lifts right off with tweezers. great. I used to slice the bottom of the legs on the ic with a craft knife when I first started doing this work but heat blower is much better as it comes off cleanly and gives no problems
good luck bud