+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: Vcd5 12.12.0 problem (/showthread.php?tid=5166)
Vcd5 12.12.0 problem - lov2xlr8 - 05-07-2014
Hello
Recently bought clone Vcd5 12.12.0,installed on win7 32 bit and worked perfect for 4 times,then connected it to audi 2010 and says not registered version...
That notebook is on internet but when not using dїдgиo5тїc.
after last worked session I was on internet ( Vcd5 cable disconnected ) and then when I connected Vcd5 and internet was off,suddenly poped out some window saying there is update for Vcd5,clicked no,after that Vcd5 cable doesnt work
Here are pictures of my interface
Is there possibility to repair this interface,this is second one that is broken...
if there is please tell me which flash cable to buy,if possible usb,because I am not good with soldering...
Thanks people
RE: Vcd5 12.12.0 problem - sco - 05-07-2014
I can't answer your question about the repair option but there is talk on the same subject here: http://cartechnology.co.uk/showthread.php?tid=4903
Always click on your internet connection and disconnect before you open the program and it should be fine from what I have seen for myself so far.
good luck with it.
RE: Vcd5 12.12.0 problem - mrriadh - 05-07-2014
(05-07-2014, 20:19 PM)lov2xlr8 Wrote: Hello
Recently bought clone Vcd5 12.12.0,installed on win7 32 bit and worked perfect for 4 times,then connected it to audi 2010 and says not registered version...
That notebook is on internet but when not using dїдgиo5тїc.
after last worked session I was on internet ( Vcd5 cable disconnected ) and then when I connected Vcd5 and internet was off,suddenly poped out some window saying there is update for Vcd5,clicked no,after that Vcd5 cable doesnt work
Here are pictures of my interface
Is there possibility to repair this interface,this is second one that is broken...
if there is please tell me which flash cable to buy,if possible usb,because I am not good with soldering...
Thanks people
put the date of ur computer back to April 2013 and it should work fine and don't update the program and don't use it when internet connection is on
RE: Vcd5 12.12.0 problem - mattydr67 - 06-07-2014
Vcd5 12.10.3 need to change the computer date ( becasue it is a beta version and beta's versions has time limitation )
Vcd5 12.12.0 it is a release version and it has no time limits. So no need to change the computer date.
I said many times that ross-tech servers can check the SёяїдL all the time when you have the internet connection turned on
So first time you'll plugg the tool to the USB and you'll try it in a car you have to know that you'll damage yor tool ( erase the SёяїдL )
If in the ABOUT your tool it is Unregistred/Unастїvатёd then you have to know that your tool it is erased and you need to reflash it ( if you have tools and dumps for this and if the tool it is with ATMEGA162 - NEC MCU cannot be reflash it - there's no solution for this ) or throw it ( as you wish )
Good luck
P.S> reflahing only with external programmers ( no USB in this moment aviable ) and you ahve to have skils in soldering ( but not imposible )
My advise it is to buy a genuine tool or a good clone that have no this kind of problems, otherwise all chinese tool are using tools with blacklist SёяїдL. So sooner or later this one will be erased it