+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Last version of ISTA/P to support F series programming? (/showthread.php?tid=51770)
Last version of ISTA/P to support F series programming? - mamujim - 03-06-2019
Hi all,
What was the last version of ISTA/P to support F series programming ?
And if someone can send a link that would be greatly appreciated.
many thanks in advance.
RE: Last version of ISTA/P to support F series programming? - SweetBMW - 03-06-2019
Last version was 3.64.002, this had all F series support. Now 3.66 only has F01 and RR.
I have no link unfortunately.
RE: Last version of ISTA/P to support F series programming? - mamujim - 03-06-2019
(03-06-2019, 10:11 AM)SweetBMW Wrote: Last version was 3.64.002, this had all F series support. Now 3.66 only has F01 and RR.
I have no link unfortunately.
having a quick read, we need an IBAC code from BMW to enable F series programing in 3.64.
is there any other way to get it working?
or which version can we use where we don't need IBAC code?
thanks again
RE: Last version of ISTA/P to support F series programming? - Bimmer540 - 03-06-2019
(03-06-2019, 10:20 AM)mamujim Wrote:(03-06-2019, 10:11 AM)SweetBMW Wrote: Last version was 3.64.002, this had all F series support. Now 3.66 only has F01 and RR.
I have no link unfortunately.
having a quick read, we need an IBAC code from BMW to enable F series programing in 3.64.
is there any other way to get it working?
or which version can we use where we don't need IBAC code?
thanks again
You can use Ibac-Generator software, or you can use in Ista-p loader (under i --> Tools--> IBAC Code Generator
RE: Last version of ISTA/P to support F series programming? - mamujim - 03-06-2019
thanks both, will give it a try
RE: Last version of ISTA/P to support F series programming? - bimmer71 - 05-06-2019
[62.0 was last w/o an ibac code needed to program f ,g and I series , no link sorry, there is a guy whom has complied a mixed version , with need data for newer cars call it pilot version 3.67 I believe in selling part of this side , I was going try the same but who has the time :
good luck .