CarTechnoloGY
kess v2 clone simos 18.1 checksum problems - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: kess v2 clone simos 18.1 checksum problems (/showthread.php?tid=51874)

Pages: 1 2


kess v2 clone simos 18.1 checksum problems - dreconx - 05-06-2019

Greetings,

i have a kess v2 v5.017 china clone.
Now this kess supports simos 18/simos18.1, simos 12 ect.. the only problem i keep having is i get a checksum error when choosing the file i would like to write. i can read the id of the ecu but no writing or recovery.
Every other ecu works, only the new simos ones are a bit weard.

does anyone of you have a solution for this?
i installed a new visual studio, tryed another kess program, still same problem.

i hope someone can help meĀ 

thanks
kind regards


RE: kess v2 clone simos 18.1 checksum problems - S3T01 - 11-06-2019

file size is the problem


RE: kess v2 clone simos 18.1 checksum problems - dreconx - 14-06-2019

(11-06-2019, 11:24 AM)S3T01 Wrote:  file size is the problem
its a 4mb file, i have heard kess v2 could do these files.
but not the 4.5mb files.
is this true?


RE: kess v2 clone simos 18.1 checksum problems - emim79 - 18-06-2019

Hi, have you tried changing the ksuite dll for kess 5017?


Rule 3: Do not Post Links on the Board! External links must be attached in a notepad file.

Thanks, Admin

Like this under



RE: kess v2 clone simos 18.1 checksum problems - emim79 - 13-07-2019

I have kess v2 5.017 ksuite 2.47, I downloaded and installed the software, from the link I posted before and extracted the dll to replace it with the dll of my ksuite 2.47.
With this solution my kess v2 now has no error
checksum and allows writing and retrieval on simo 18.

I'm writing with google translate .


RE: kess v2 clone simos 18.1 checksum problems - S3T01 - 15-07-2019

(13-07-2019, 09:24 AM)emim79 Wrote:  I have kess v2 5.017 ksuite 2.47, I downloaded and installed the software, from the link I posted before and extracted the dll to replace it with the dll of my ksuite 2.47.
With this solution my kess v2 now has no error
checksum and allows writing and retrieval on simo 18.

I'm writing with google translate .

Have you successfully write to simos 18? Please share your experience


RE: kess v2 clone simos 18.1 checksum problems - GCamjose - 17-07-2019

I have exakte Same request from this Problem?
And Tell me,the read and Write from Obd Port ?
Or must open the ecu?
Thanks all for help me qnd reaply me!


RE: kess v2 clone simos 18.1 checksum problems - GCamjose - 17-07-2019

Please Informationen posible read Write in Obd this Ecu kess v2 clone red pcb Platine 5.017?


RE: kess v2 clone simos 18.1 checksum problems - S3T01 - 17-07-2019

Its via OBD not open ecu


RE: kess v2 clone simos 18.1 checksum problems - Willinickersen - 20-07-2019

The link have updated 2.43 dll's...? Is this newer than your 2.47?