kess v2 clone simos 18.1 checksum problems - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: kess v2 clone simos 18.1 checksum problems (/showthread.php?tid=51874) Pages:
1
2
|
kess v2 clone simos 18.1 checksum problems - dreconx - 05-06-2019 Greetings, i have a kess v2 v5.017 china clone. Now this kess supports simos 18/simos18.1, simos 12 ect.. the only problem i keep having is i get a checksum error when choosing the file i would like to write. i can read the id of the ecu but no writing or recovery. Every other ecu works, only the new simos ones are a bit weard. does anyone of you have a solution for this? i installed a new visual studio, tryed another kess program, still same problem. i hope someone can help meĀ thanks kind regards RE: kess v2 clone simos 18.1 checksum problems - S3T01 - 11-06-2019 file size is the problem RE: kess v2 clone simos 18.1 checksum problems - dreconx - 14-06-2019 (11-06-2019, 11:24 AM)S3T01 Wrote: file size is the problemits a 4mb file, i have heard kess v2 could do these files. but not the 4.5mb files. is this true? RE: kess v2 clone simos 18.1 checksum problems - emim79 - 18-06-2019 Hi, have you tried changing the ksuite dll for kess 5017? Rule 3: Do not Post Links on the Board! External links must be attached in a notepad file. Thanks, Admin Like this RE: kess v2 clone simos 18.1 checksum problems - emim79 - 13-07-2019 I have kess v2 5.017 ksuite 2.47, I downloaded and installed the software, from the link I posted before and extracted the dll to replace it with the dll of my ksuite 2.47. With this solution my kess v2 now has no error checksum and allows writing and retrieval on simo 18. I'm writing with google translate . RE: kess v2 clone simos 18.1 checksum problems - S3T01 - 15-07-2019 (13-07-2019, 09:24 AM)emim79 Wrote: I have kess v2 5.017 ksuite 2.47, I downloaded and installed the software, from the link I posted before and extracted the dll to replace it with the dll of my ksuite 2.47. Have you successfully write to simos 18? Please share your experience RE: kess v2 clone simos 18.1 checksum problems - GCamjose - 17-07-2019 I have exakte Same request from this Problem? And Tell me,the read and Write from Obd Port ? Or must open the ecu? Thanks all for help me qnd reaply me! RE: kess v2 clone simos 18.1 checksum problems - GCamjose - 17-07-2019 Please Informationen posible read Write in Obd this Ecu kess v2 clone red pcb Platine 5.017? RE: kess v2 clone simos 18.1 checksum problems - S3T01 - 17-07-2019 Its via OBD not open ecu RE: kess v2 clone simos 18.1 checksum problems - Willinickersen - 20-07-2019 The link have updated 2.43 dll's...? Is this newer than your 2.47? |