+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMWhat v12.08 FULL (/showthread.php?tid=5188)
Pages:
1
2
BMWhat v12.08 FULL - meksovic - 07-07-2014
BMWhat v12.08 FULL
Description
Advanced car dїдgиo5тїc App for BMW cars
The only specific dїдgиo5тїc tool for BMW on Android!
With this app you can read out fault codes like the ёxpёятs.
While OBD Readers are limited to a small number of electronic control units (ECUs) and even a smaller number of fault codes, this app reads out practically all compatible ECUs.
Normally this is only possible with very expensive ёxpёят equipment.
Now you can check your car yourself in-depth!
It provides modell specific fault code explanations.
...and you can even clear the stored manufacturer DTC fault codes - not just OBD!
Main features are:
- Perform selected in-depth fault analysis
- Provide model specific text explanation of fault code
- Send the analysis protocol per email
- Clear DTC fault codes
- Codings with many possibilities
- Engine parameter monitoring for many engines
Since this is a rather complex issue, not all cars may respond to the specific commands sent over Bluetooth adapters.
Please just try the free version to see if your car is being supported BEFORE purchasing the full version
And please let us know your experience by sending email to [email protected]
Compatibility
The following BMW models were successfully tested:
1er: E81, E87
1er Convertible: E88
1er Coupe: E82
3er: E90
3er Touring: E91
3er Coupe: E92
3er Convertible: E93
5er: E60
5er Touring: E61
6er: E63
6er Convertible: E64
7er: E65, E66
X3: E83
X5: E70
X6: E71, E72
MINI
E46, E39 and other older models- only with our USB-OBD cable on USB-OTG!
F-Modelle
Experience shows that one would expect the above models to be compatible.
*** However please test the compatibility with the free lite version BEFORE buying the full version. ***
This app is specifically for BMW models - it is not an app by BMW itself
What's New
Added new engine parameters
Coding:
Added Cabriocodings (CTM)
Voltage monitoring for more bulbs (FRM)
I want to share with my forum friends!!!
PLS hit thanks if you like it!
Enjoy!
RE: BMWhat v12.08 FULL - DG0884 - 08-07-2014
Does anybody have this app but for IPhone?
RE: BMWhat v12.08 FULL - meksovic - 08-07-2014
(08-07-2014, 06:03 AM)DG0884 Wrote: Does anybody have this app but for IPhone?
it is not good the connection on Ios as in Android!
RE: BMWhat v12.08 FULL - gf3106 - 10-07-2014
Thanks for this, it will satisfy my coding needs until I have the time to get my head around ñc5 / i5тд/P. Had it all working for my E46 but having difficulty getting it set up for E92.
Just tested the demo app on my E92 335i (annoyingly 03/07 build) and it can pull faults and code.
RE: BMWhat v12.08 FULL - meksovic - 11-07-2014
(10-07-2014, 23:40 PM)gf3106 Wrote: Thanks for this, it will satisfy my coding needs until I have the time to get my head around ñc5 / i5тд/P. Had it all working for my E46 but having difficulty getting it set up for E92.
Just tested the demo app on my E92 335i (annoyingly 03/07 build) and it can pull faults and code.
to code the E92 you need an Bluetooth dongle for diagnosis is ok the usb cable.
you can read on official page the compatibility!
RE: BMWhat v12.08 FULL - DG0884 - 11-07-2014
(11-07-2014, 05:35 AM)meksovic Wrote:(10-07-2014, 23:40 PM)gf3106 Wrote: Thanks for this, it will satisfy my coding needs until I have the time to get my head around ñc5 / i5тд/P. Had it all working for my E46 but having difficulty getting it set up for E92.
Just tested the demo app on my E92 335i (annoyingly 03/07 build) and it can pull faults and code.
to code the E92 you need an Bluetooth dongle for diagnosis is ok the usb cable.
you can read on official page the compatibility!
Also work with K+Dcan.
(11-07-2014, 05:35 AM)meksovic Wrote:(10-07-2014, 23:40 PM)gf3106 Wrote: Thanks for this, it will satisfy my coding needs until I have the time to get my head around ñc5 / i5тд/P. Had it all working for my E46 but having difficulty getting it set up for E92.
Just tested the demo app on my E92 335i (annoyingly 03/07 build) and it can pull faults and code.
to code the E92 you need an Bluetooth dongle for diagnosis is ok the usb cable.
you can read on official page the compatibility!
Also work with K+Dcan but you need usb otg cable.
RE: BMWhat v12.08 FULL - gf3106 - 11-07-2014
Thanks, I have bought a USB OTG cable for my Note 2 - to hopefully use my K+Dcan cable. I want to fit CIC iDrive & Combox in the future, I presume that i5тд/P would be better for that, I read it has a retrofits section
RE: BMWhat v12.08 FULL - tukan - 11-07-2014
(11-07-2014, 14:43 PM)gf3106 Wrote: Thanks, I have bought a USB OTG cable for my Note 2 - to hopefully use my K+Dcan cable. I want to fit CIC iDrive & Combox in the future, I presume that i5тд/P would be better for that, I read it has a retrofits section
I'm pretty sure that u can forget about retrofiting ur CIC iDrive & Combox with BMWHat
Of course i5тд/P will do the job.
RE: BMWhat v12.08 FULL - milanE90 - 31-07-2014
So what is modified about this app???
As I can see it's a regular free app which can be downloaded form playstore...
RE: BMWhat v12.08 FULL - gf3106 - 31-07-2014
(31-07-2014, 17:49 PM)milanE90 Wrote: So what is modified about this app???
As I can see it's a regular free app which can be downloaded form playstore...
They have updated to v13 and stopped accepting (modified ) activation's for anything under v13 IIRC.
If you already астїvатёd this copy before the release of v13 then it still works (i think) but otherwise you will have to wait until a kind poster on this forum finishes modifying the v13.
