+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Help setting up spftware for Navigation codes (/showthread.php?tid=5192)
Help setting up spftware for Navigation codes - rodrigoarratia - 07-07-2014
Hi guys,
Thanks in advance for reading this topic.
I'm quite new in this forum and wanted to start doing something. I think I have downloaded all the software needed for generating my codes for a Navigation map upgrade.
So as far as I understood my main steps are:
1.- get my 1b/de file from the car (using the ODB2 - Ethernet cable and SWID reader). I am not sure which software is needed below the SWID reader, since it references ёdїдbд5 folder to replace some prg files.
I already set up ё_5у5 (even I don't know if it is required for my purposes).
2.- Use NBT.exe and the file generated in the previous step in order to build the final code (after b64 decoding the 1b/de file).
Are my assumptions right?
Any advice, guide or document to follow?
I already tried to search the forum, but as I'm quite new to the forum and these technologies its getting hard to perform the right search.
Regards,
RE: Help setting up spftware for Navigation codes - Fx82 - 17-08-2014
I'm missing what kind of navigation.
RE: Help setting up spftware for Navigation codes - ruben_17non - 29-08-2014
Yea you need to extract DE or 1B with swidreader or ё_5у5 after you can generate map update´s with this f5с
Check this:
http://www.youtube.com/watch?v=DLmFvFGCFcE