+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: EDC16CP35 (/showthread.php?tid=52165)
EDC16CP35 - Vizz96 - 11-06-2019
Hi is it ok to read/write with kess v2 clone on an EDC16CP35 it is an bmw 325d 392 it is ksuite v2.47 eu kess clone Thanks
RE: EDC16CP35 - walshy155 - 11-06-2019
I think you'll have no problems mate, I use MPPS for most EDC16 though
RE: EDC16CP35 - Vizz96 - 12-06-2019
(11-06-2019, 17:49 PM)walshy155 Wrote: I think you'll have no problems mate, I use MPPS for most EDC16 though
Thanks i have heard people have had issues writing back to it with kess V2 clone ?
RE: EDC16CP35 - ROD-BENDERS - 12-06-2019
(12-06-2019, 19:41 PM)Vizz96 Wrote:(11-06-2019, 17:49 PM)walshy155 Wrote: I think you'll have no problems mate, I use MPPS for most EDC16 though
Thanks i have heard people have had issues writing back to it with kess V2 clone ?
I have eu kess clone and i have written ok to about 20 of those ecu ok.. but on two occassions i have encountered burned flash memory... so maybe mpps or ktag.. definately ktag no problems at all
RE: EDC16CP35 - David89 - 12-06-2019
Galletto clone works very good with this ecu via obd.