Newbie Project toyota corolla 1nd-tv - edc16c31 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Newbie Project toyota corolla 1nd-tv - edc16c31 (/showthread.php?tid=52192) |
Newbie Project toyota corolla 1nd-tv - edc16c31 - wolfen - 12-06-2019 Hi all.. I was going to read an ecu but i need heating gun to open it, so this project starters later today. I have my sons corolla d4d 1nd-tv engine with ecu problem according to Toyota. Some toyotas with this engine has a starting problem when the engine is warm and the problem is in the ecu they say. So.. i am going to open this ecu, read it with ktag and try to get a good working file for this one. the ecu is toyota corolla 1nd-tv - edc16c31 - mpc563. Bosch 281 011 733 and 89661-02A90 Any tips / advise ? RE: Newbie Project toyota corolla 1nd-tv - edc16c31 - wolfen - 24-06-2019 Ok, Finally got all the tools i needed. but i got problem reading this ecu, it seems like it reads all without problem but when i save the file i get this error msg : Checksum error. send the software vendor the backup file. whats next ? skip backup ? I tried reading it with OptiCan 101 interface too after a tip from a friend but i get same result. RE: Newbie Project toyota corolla 1nd-tv - edc16c31 - raffy haddad - 24-06-2019 if you read with ktag or kess check if c++ is downloaded if not you will have this error regards RE: Newbie Project toyota corolla 1nd-tv - edc16c31 - wolfen - 24-06-2019 Ahh.. c++. any spesific version ? Your slogan is correct. Always new stuff to learn I'll try it soon. RE: Newbie Project toyota corolla 1nd-tv - edc16c31 - raffy haddad - 24-06-2019 It exist on cd soft that came with Regarfs RE: Newbie Project toyota corolla 1nd-tv - edc16c31 - wolfen - 25-06-2019 I just tested, did not work, i downloaded latest vcredistx86.exe too, but no luck. This is being tested on a laptop with windows 7 32 bit. I will test on a laptop with windows XP 32 bit later today. RE: Newbie Project toyota corolla 1nd-tv - edc16c31 - raffy haddad - 25-06-2019 During soft installation it shoul automaticaly download c++ I have it working on both pc win xp and 7 32 bit Try redownload soft Regards RE: Newbie Project toyota corolla 1nd-tv - edc16c31 - wolfen - 12-07-2019 Hmm.. tried win7 32 bit, xp 32 bit.. but same trouble.. With win xp i got the error on the picture.Even tried k-suite 225 wich work great with vag ecu's. |