CarTechnoloGY
IMMO OFF or clone alfa 147 1.6 Bosch ME7.3.1 - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: IMMO OFF or clone alfa 147 1.6 Bosch ME7.3.1 (/showthread.php?tid=52240)



IMMO OFF or clone alfa 147 1.6 Bosch ME7.3.1 - Gabriel130592 - 13-06-2019

Hi, I need IMMO OFF of this car.
I have the original ECU to clone.
But I do not know how to read the original eeprom. I have UPA, Kess, carprog ..
ECU hybrid Bosch ME7.3.1
HW: 0261206714.
SW: 1277356572
I attach the flash to immo off.
Thanks in advance.
Regards



RE: IMMO OFF or clone alfa 147 1.6 Bosch ME7.3.1 - massimo74 - 13-06-2019

write this file for immo off in boot, after start you can rewrite your backup for immo working

kess is no good for this ecu
bad checksum
better fgtech or mpps


RE: IMMO OFF or clone alfa 147 1.6 Bosch ME7.3.1 - BWF - 19-06-2019

I have worked a lot with these ecus.
My kess does it very well.
You can not do inmo off, just virginize.


RE: IMMO OFF or clone alfa 147 1.6 Bosch ME7.3.1 - sunxemx - 22-06-2019

(13-06-2019, 13:24 PM)Gabriel130592 Wrote:  Hi, I need IMMO OFF of this car.
I have the original ECU to clone.
But I do not know how to read the original eeprom. I have UPA, Kess, carprog ..
ECU hybrid Bosch ME7.3.1
HW: 0261206714.
SW: 1277356572
I attach the flash to immo off.
Thanks in advance.
Regards

Use the method in attachment I have used this and it works


RE: IMMO OFF or clone alfa 147 1.6 Bosch ME7.3.1 - massimo74 - 22-06-2019

(19-06-2019, 20:44 PM)BWF Wrote:  I have worked a lot with these ecus.
My kess does it very well.
You can not do inmo off, just virginize.

my file is immo off ,after rewrite original is immo on

same results of virginize


RE: IMMO OFF or clone alfa 147 1.6 Bosch ME7.3.1 - Gabriel130592 - 25-06-2019

hello, thanks for all! I program the file, start car and re-program original file by OBD.
The car Works OK.
Very thanks!
Regaerds