+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: E70 8HP gearbox (/showthread.php?tid=52321)
E70 8HP gearbox - ltujustas - 14-06-2019
Hello mates. Maybe there are a solution to reset 8hp isn for cas and dme ? In car ori dde was broken, it even cant read. I have got new donor ecu and adapted to the cas. Now car starts but allways stays on Parking. Maybe someone know solution or programmer like explorer or auto hex bmw to reset isn in egs for E series ?
RE: E70 8HP gearbox - Levanime - 14-06-2019
no tool can "reset" ISN in E70 8HP
so what u gonna do is revert ISN what was there in CAS, and write that ISN in replacement DDE,
you dont have other options
RE: E70 8HP gearbox - ltujustas - 14-06-2019
I have tried write decrypted isn to ecu, but shows error ews manipulation and something about dde eep (maybe chksm bad in eeprom)
I dont know its possible on dde8 to do that manipulation
RE: E70 8HP gearbox - emhtuning - 15-06-2019
you need to read ISN from the new ( second hand ) EGS and write that ISN to CAS and DDE , then and only then the car will start and shift too
RE: E70 8HP gearbox - willisodhiambo - 15-06-2019
(14-06-2019, 22:53 PM)ltujustas Wrote: I have tried write decrypted isn to ecu, but shows error ews manipulation and something about dde eep (maybe chksm bad in eeprom)
I dont know its possible on dde8 to do that manipulation
With what tool?
RE: E70 8HP gearbox - ltujustas - 15-06-2019
(15-06-2019, 05:07 AM)emhtuning Wrote: you need to read ISN from the new ( second hand ) EGS and write that ISN to CAS and DDE , then and only then the car will start and shift too
which tool can read 8hp egs from e-series ?
(15-06-2019, 06:38 AM)willisodhiambo Wrote:cas3+ editor by neuronin(14-06-2019, 22:53 PM)ltujustas Wrote: I have tried write decrypted isn to ecu, but shows error ews manipulation and something about dde eep (maybe chksm bad in eeprom)
I dont know its possible on dde8 to do that manipulation
With what tool?