+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: ERROR 02 message ON RCD 300 DISPLAY (/showthread.php?tid=52583)
ERROR 02 message ON RCD 300 DISPLAY - alexandr1966 - 20-06-2019
RCD 300 by Grundig 1K0 035 186 AF displays the message ERROR 02 (from begin). I have tried unlock 24c32 with NYO4 but I have the same result! Can anyone help me?
RE: ERROR 02 message ON RCD 300 DISPLAY - masterskay62 - 21-06-2019
(20-06-2019, 21:50 PM)alexandr1966 Wrote: RCD 300 by Grundig 1K0 035 186 AF displays the message ERROR 02 (from begin). I have tried unlock 24c32 with NYO4 but I have the same result! Can anyone help me?
Hi.
Try.............
RE: ERROR 02 message ON RCD 300 DISPLAY - diddygy - 21-06-2019
Hi you need to remove eeprom and check circuit SDA,SCL ...
RE: ERROR 02 message ON RCD 300 DISPLAY - alexandr1966 - 21-06-2019
(21-06-2019, 02:54 AM)masterskay62 Wrote:I tried it - the same result!(20-06-2019, 21:50 PM)alexandr1966 Wrote: RCD 300 by Grundig 1K0 035 186 AF displays the message ERROR 02 (from begin). I have tried unlock 24c32 with NYO4 but I have the same result! Can anyone help me?
Hi.
Try.............
RE: ERROR 02 message ON RCD 300 DISPLAY - alexandr1966 - 21-06-2019
(21-06-2019, 02:54 AM)masterskay62 Wrote:(20-06-2019, 21:50 PM)alexandr1966 Wrote: RCD 300 by Grundig 1K0 035 186 AF displays the message ERROR 02 (from begin). I have tried unlock 24c32 with NYO4 but I have the same result! Can anyone help me?
Hi.
Try.............
Your dump is OK. The problem was in the bad mechanism.