G05 TAL issue, not able to flash MGU - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: G05 TAL issue, not able to flash MGU (/showthread.php?tid=52606) |
RE: G05 TAL issue, not able to flash MGU - Adel Abdou - 10-07-2019 MGU depends on RAM too, so I guess there is some sort of procedure to flash cars with MGU. RE: G05 TAL issue, not able to flash MGU - Thorsten - 11-07-2019 Ok, but the problem, what I reported, was while generating TAL... Thorsten RE: G05 TAL issue, not able to flash MGU - petersamer012 - 12-07-2019 try Icom A series with esys new or ista+ RE: G05 TAL issue, not able to flash MGU - Thorsten - 12-07-2019 Hm, I read this at latest ista 4.18.x information. But this didnt make no sense - the issue is while TAL generating, not while flashing. Thorsten |