+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: RS3 FL steering wheel on 2015 s3 failed (/showthread.php?tid=53084)
RS3 FL steering wheel on 2015 s3 failed - dndrb3319 - 03-07-2019
Hello! I am a newbie and trying to retrofit VC, MIB2, Steering on my 2015 s3!
Now, I am going to ask anybody who meet trouble like me.
Before RS3 retrofit steering wheel, I knew that steering wheel is plug and play. (except ttrs or r8 steering)
After retrofit RS3 steering, I could know that it is not plug and play..(Maybe somebody is plug&play)
Now, My situation is that I can use 90% of buttons
In Left multi function buttons, I can use most of them, even view and back. (When I put view button , it works like menu)
In Right multi function buttons, I can use mos of them, execpt Call button. I do not know why
And paddles, They do not work. But, lighting is worked)
So I have been finding information for finishing retrofit..
At first, I checked wiring diagrams. But, they are same
( I used erwin site with payment to know 2016~2019 rs3 diagram )
Airbag harness is consist of two connectors
12 pin is for column, 4 pin is for multi function with paddles
12 pin connector's Wiring is same,
but 4 pin connector's is difference.
However, in diagram, There is no infomation for 4 pin(Never find why fourth pin is there)
4 pin from airbag harness.
pin 1(purple)- Lin
pin 2(red)- B+
pin 3(brown)- ground
pin 4 is empty
4 pin from multifunction buttons
pin 1(purple)- maybe Lin?
pin 2(black)- B+
pin 3(black)- ground
pin 4(black)- I dont know (There is no information diagram of 2016~2019 rs3 in erwin )
So, I passed checking diagram.
(If you try to change ttrs, r8 steering, You should swap pins)
Second one was checking coding data with vcds, odis.
I could find something in vcds
First one is,
No ASAM data for: "EV_SMLSKLOMQB" (AU37)
227607 - ROD - Unknown Error code
Second one are,
In adaptaion channel,
ENG118779-IDE02583-Multi_function_steering_control_module Coding Value- Steering Wheel Tiptronic switch
Error: Channel Not Available.
ENG118779-MAS06614-Multi_function_steering_control_module Coding Value- Version
Error: Channel Not Available.
After finding errors, I check part number of my steering column.
Because, When I tried to swap mk6 gti steering on mk5 gti.
I had to change column to use multi fuction buttons
So I checked my column number, and 5Q0953549C is mine
After checking, I tried to fined somebody who swap steering wheel on rs3.. (but I couldn't)
But, not many information for rs3 steering.
I could find ttrs ttrs steering information.(I think ttrs and r8 were released around 2015 )
That is why they(ttrs, r8 steering) works with 5Q0953549C column.
However, RS3 was released from 2016 and 5Q0953549C was used until May, 2015)
So, I guess changing Column is solution or not..
In first photo,
As you see 5Q0953549C is until may, 2015
5Q0953549E is used until may, 2018
After may of 2018, column and lever are combined.
I think 5Q0953549E is that I need to change.
How do you guys think my problem?
Is problem be solved with column
or needed wiring changing?
Thanks for reading this thread.
RE: RS3 FL steering wheel on 2015 s3 failed - Willinickersen - 03-07-2019
You may also try VCP PRO and their forum specialists....
RE: RS3 FL steering wheel on 2015 s3 failed - dndrb3319 - 03-07-2019
(03-07-2019, 04:15 AM)Willinickersen Wrote: You may also try VCP PRO and their forum specialists....
Thanks mention VCP..
But, I have already tried with VCP ( However, I am not good at VCP)
I was looking for ASAM means
Maybe, It could relative with firmware.. SO, I used VCP to flash, but I could not do.
I am not sure, only flashing steering column that make paddle works.
Hm.. Now, looking at column that end of E!
RE: RS3 FL steering wheel on 2015 s3 failed - dndrb3319 - 11-07-2019
Steering column was not cause.
I am not sure anymore..
Maybe multi fuction buttos with wire harness is also be caused.
RE: RS3 FL steering wheel on 2015 s3 failed - Willinickersen - 11-07-2019
I don't think you quite understand me.... The VCP forum have many good technicians
RE: RS3 FL steering wheel on 2015 s3 failed - dndrb3319 - 12-07-2019
Could you help me? or introduce somebody to check my paddle shifter?
RE: RS3 FL steering wheel on 2015 s3 failed - dndrb3319 - 24-07-2019
It was my fault
I jist replaced both of multifuction buttons with correct part number
RE: RS3 FL steering wheel on 2015 s3 failed - mft133 - 25-10-2019
You could save me some time by sharing the correct partnumber
(24-07-2019, 20:04 PM)dndrb3319 Wrote: It was my fault
I jist replaced both of multifuction buttons with correct part number