+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Audi S2 (/showthread.php?tid=5331)
Audi S2 - Koanex - 14-07-2014
I have a modified hex file
The file works fine, but the problem is when I use vag-com or vcds, there is an error code ecu defective.
I don’t have the original file, cant find them.
I can clear the error but everytime the error appear again.
What can I do?
Is there a possibility adjust the manifold pressure?
Because in this tuning file the pressure is about 1,45 and the turbo does not sound good at this point.
So I would like to regulate down to 1,40 or 1,35.
Is this hard to change?
Which program do you use?
I only have winols…
The next question is
I want two tuning files on one eprom?
How to?
Can you give me some info?
Maybe you can show me how to?
Do you also have some tuning files for Audi?
I also have some other tuning files, if you are interested we could change.
Thanks a lot.
RE: Audi S2 - Koanex - 25-07-2014
Nobody who can help me?